PP/PP-g-MAH/Talc/EP复合材料的性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ325.14

基金项目:

贵州省重点科技攻关项目(黔科合GY字[2009]3010);贵州省科技创新人才团队建设项目(黔科合人才团队(2010)4004)


Properties of Polypropylene/PP-g-MAH/Talc/Epoxy Resin Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过熔融共混制备聚丙烯(PP)/马来酸酐接枝聚丙烯(PP-g-MAH)/滑石粉(Talc)/环氧树脂(EP)复合材料,研究了E-51/504/554(55.6/42.4/2,E1)、E-51/EDA/554(92.2/7.8/0.01,E2)、E-20/2E4MZ(100/4,E3)三种EP体系及其含量对复合材料力学性能的影响,结果表明,E-1对复合材料的弯曲模量改善最显著,当加入4%的E1时,复合材料的弯曲模量达到最大值,提高了29.1%。傅里叶红外光谱(FT-IR)分析表明,EP与PP-g-MAH发生了酯化反应。观察复合材料的微观结构,发现EP阻止Talc的凝聚,加强了两相界面作用力。

    Abstract:

    Polypropylene(PP)/maleic anhydride-grafted polypropylene(PP-g-MAH)/talc/epoxy(EP) composites were prepared in a corotating twin-screw extruder.The effects of epoxy systems including E-51/504/554(55.6/42.4/2,E1),E-51/EDA/554(92.2/7.8/0.01,E2) and E-20/2E4MZ(100/4,E3),and their epoxy contents on the mechanical properties of the composite were investigated.The result show that the most significant improvement of the bending modulus of the composites is obtained when E1 is added.When the E1 content is 4%,the bending modulus of the composites is the largest among all investigated cases,and it is improved by 29.1%.The Fourier transform infrared spectrum(FT-IR) reveals that the esterification reaction between the epoxy group and MAH group in PP-g-MAH has taken place.The morphological study of composites by scanning electron microscopy(SEM) shows that the agglomeration of talc is prevented,and the interfacial force is enhanced by epoxy resin.

    参考文献
    相似文献
    引证文献
引用本文

罗筑,陈梅红,涂兴文,孙华伟. PP/PP-g-MAH/Talc/EP复合材料的性能[J].高分子材料科学与工程,2012,28(5):73-76. Zhu Luo, Meihong Chen, Xingwen Tu, Huawei Sun. Properties of Polypropylene/PP-g-MAH/Talc/Epoxy Resin Composites[J]. Polymer Materials Science & Engineering,2012,28(5):73-76.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司