含有不同光敏剂的m-LLDPE薄膜的辐照交联
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ325.12

基金项目:


Radiation Crosslinking of m-LLDPE Film with Different Photosensitizer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将加入不同光敏剂硬脂酸铁(FeSt)、硬脂酸钴(CoSt)和二乙基二硫代氨基甲酸铁(FeDEC)的茂金属线性低密度聚乙烯(m-LLDPE)分别吹塑成膜,研究了含有不同光敏剂的m-LLDPE薄膜在60Co-γ射线辐照的条件下,辐照剂量及剂量率等因素对交联度的影响。结果表明,m-LLDPE薄膜的交联度随着辐照剂量的增加而增加。光敏化剂CoSt对m-LLDPE薄膜的凝胶化作用比FeSt和FeDEC效果好,含有CoSt0.3%的m-LLDPE的凝胶含量最高。越靠近辐照源则辐射剂量率越高,交联度随着辐照剂量的增加而较快地增加。

    Abstract:

    m-LLDPE with adding different photosensitizers such as ferric stearate(FoSt),cobalt stearate(CoSt) and diethyl dithiocarbamate iron(FeDEC) was blown to the film respectively.The investigation of the radiation dose,dose rate and other factors was carried out on the impact of the degree of crosslinking m-LLDPE film with different content photosensitizers under 60Co-γ ray irradiation conditions.The results show that: the cross-linking of m-LLDPE film increases along with the increase of the radiation dose.The photosensitive agent CoSt cross-linking effective with m-LLDPE film is better than FeSt and FeDEC,the CoSt content of 0.3% is the best value.The radiation source is closer to the higher radiation dose rate,the degree of cross-linking increases with the irradiation dose increaseing rapidly,to achieve the larger value of cross-linking.

    参考文献
    相似文献
    引证文献
引用本文

李海东,李海龙,程凤梅.含有不同光敏剂的m-LLDPE薄膜的辐照交联[J].高分子材料科学与工程,2012,28(5):89-91,95. Haidong Li, Hailong Li, Fengmei Cheng. Radiation Crosslinking of m-LLDPE Film with Different Photosensitizer[J]. Polymer Materials Science & Engineering,2012,28(5):89-91,95.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司