β-环糊精与聚丁二酸丁二醇酯(PBS)包合物对PBS结晶性的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.41

基金项目:

高分子材料工程国家重点实验室开放课题基金资助(KF201101);温州科技计划项目(H20080045);陕西省重大科技创新项目(2009ZKC08-09);陕西省教育厅产业化培育项目(2010JC01)


Influence of β-CD and PBS Inclusion Complex on Crystallinity of PBS
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    与不同传统成核剂进行比较,研究了β-环糊精(β-CD)与聚丁二酸丁二醇酯(PBS)包合物存在时PBS的结晶行为。采用偏光显微镜观察了复合物球晶形态的变化,采用差示扫描量热法(DSC)和X射线衍射法(WAXD)研究了不同成核剂对PBS结晶性的影响,并且研究了成核剂改性后PBS复合物的力学性能和亲/疏水性。研究结果表明,β-CD与PBS包合物(PBSIC)与PBS复合后,球晶变化不明显,其球晶直径为150μm。PBSIC可以显著提高PBS的结晶能力,其结晶温度、结晶度较纯PBS分别提高3.86℃、6.45%,结晶速度明显增加,力学性能有所改善,并具有与传统聚酯类成核剂相当的成核能力。

    Abstract:

    Compared with the different traditional nucleating agent,the crystallization behavior of PBS with the presence of β-cyclodextrin(β-CD) and poly(butylene succinate)(PBS) inclusion complex was studied.Using polarizing microscopy,the composites spherulite morphological changes were observed.By differential scanning calorimetry(DSC) and X-ray diffraction(WAXD),the effects of different nucleating agents on crystallization were discussed.Moreover,the mechanical properties and pro/hydrophobicity of PBS composites modified with nucleating agent were investigated.The results show that ofter β-CD and PBS inclusion complex(PBSIC) is compounded with PBS,the change of spherulite shape is not obviously,the diameter is 150μm.PBSIC can significantly improve the crystallization ability of PBS,the crystallization temperature and crystallinity is increased by 86 ℃,6.45%respectively,the crystallization rate increases and mechanical properties are improved,that it has the equivalent capacity with the traditional polyester nucleating agent.

    参考文献
    相似文献
    引证文献
引用本文

张敏,宋洁,葛正浩,安莎莎,张恺,邱建辉.β-环糊精与聚丁二酸丁二醇酯(PBS)包合物对PBS结晶性的影响[J].高分子材料科学与工程,2012,28(5):96-99,104. Min Zhang, Jie Song, Zhenghao Ge, Shasha An, Kai Zhang, Jianhui Qiu. Influence of β-CD and PBS Inclusion Complex on Crystallinity of PBS[J]. Polymer Materials Science & Engineering,2012,28(5):96-99,104.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司