聚乙烯醇水溶液低温稳定性的影响因素
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O647.2

基金项目:

四川大学高分子材料工程国家重点实验室自主课题


Factors Influencing the Stability of Poly(Vinyl Alcohol) Solutions at Low Temperature
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过测定聚乙烯醇水溶液表观黏度随时间的变化,并结合结构分析,研究了低温(10℃)环境中聚乙烯醇聚合度、醇解度及质量分数对聚乙烯醇水溶液稳定性的影响。结果表明,当醇解度、质量分数一定时,聚合度越大,聚乙烯醇水溶液越容易发生凝胶;当聚合度、质量分数一定时,醇解度越大,聚乙烯醇水溶液的稳定性越差;当聚合度、醇解度一定时,质量分数越大,聚乙烯醇水溶液发生凝胶的时间越短。在此基础上,确定了醇解度99%的PVA水溶液发生凝胶的临界质量分数和凝胶化时间。

    Abstract:

    The stability of poly(vinyl alcohol)(PVA) aqueous solutions with different alcoholysis degree,polymerization degree and concentration was investigated by the measurement of apparent viscosity at 10 ℃.The results show that,with the increase of polymerization degree,PVA aqueous solution with the same alcoholysis degree and concentration changes to gelatin more easily.The larger alcoholysis degree is,the poorer stability of PVA solution with identical polymerization degree and concentration has.The results also demonstrate that,the apparent viscosity of PVA solution increases with the increase of PVA concentration.The critical concentration and gelatin time of PVA aqueous solution with 99% alcoholysis degree were also determined.

    参考文献
    相似文献
    引证文献
引用本文

王聪,江龙,淡宜.聚乙烯醇水溶液低温稳定性的影响因素[J].高分子材料科学与工程,2012,28(5):105-107,112. Cong Wang, Long Jiang, Yi Dan. Factors Influencing the Stability of Poly(Vinyl Alcohol) Solutions at Low Temperature[J]. Polymer Materials Science & Engineering,2012,28(5):105-107,112.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司