连续混炼过程比能耗分析
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ330.63

基金项目:

863高技术研究资助项目(2009AA042142)


Specific Energy Consumption Analysis of Continuous Mixing Process
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将连续混炼过程的有效比能耗分为升温、混炼、脱挥和建压比能耗,并提出了计算各项的一种方法。用该方法对不同机型、不同规格、不同加工对象的连续混炼机的比能耗进行了分析。结果表明,在多数连续混炼过程中,升温比能耗在总有效比能耗中所占比例都较大,建压比能耗所占比例都很小;原料热物性是影响有效比能耗及其构成的根本因素;当原料和混炼产物质量确定时,连续混炼机的螺杆与机筒结构、螺杆直径、产量、混炼工艺等都会影响有效比能耗及其构成。

    Abstract:

    In this paper,the effective specific energy consumption(ESEC) of a continuous mixing process is divided into four portions,i.e.specific energy consumption of heating-up(SEC_H),mixing(SEC_M),venting(SEC_V) and pressurizing(SEC_P).A method for calculating ESEC and its portions was proposed.ESEC and its portions of continuous mixers which are different in machine type,specification and processed materials were calculated and analyzed.The results show that: 1) for most continuous mixing processes,SEC_H has a very high ratio and SEC_P extreme low one in total ESEC.2) thermo-physical properties of raw materials are the essential factor that determines ESEC and its portions.3) under the conditions of same materials and comparable mixing quality,screw and barrel’s geometry,screw’s diameter,output and process parameters of continuous mixers will impact ESEC and its portions.

    参考文献
    相似文献
    引证文献
引用本文

李建立,马玉录,谢林生,方程,龚树云.连续混炼过程比能耗分析[J].高分子材料科学与工程,2012,28(5):160-164. Jianli Li, Yulu Ma, Linsheng Xie, Cheng Fang, Shuyun Gong. Specific Energy Consumption Analysis of Continuous Mixing Process[J]. Polymer Materials Science & Engineering,2012,28(5):160-164.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司