热驱动形状记忆聚合物的本构建模方法回顾
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TG139.6

基金项目:

教育部新世纪优秀人才支持计划(NCET-08-0150)


Review on Constitutive Modeling Methods of Thermally Actuated Shape Memory Polymers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    形状记忆聚合物的本构关系对于其结构设计和力学行为的预报具有重要意义,但是目前对形状记忆聚合物本构模型的研究仍相对不多。文中通过回顾十几年来国内外对热驱动形状记忆聚合物本构模型研究的发展动态,归纳了形状记忆聚合物本构的建模方法与思想,按照流变学方法、细观力学方法以及二者相结合的方法分别加以介绍和评述,并对形状记忆聚合物本构建模今后可能面临解决的关键问题进行了预测。

    Abstract:

    The constitutive relationship of shape memory polymer(SMP) is significant in the application of structural design and prediction on mechanical behavior,but the investigation on the constitutive model of SMP is still insufficient.In this paper,the development of constitutive model of thermally actuated shape memory polymers in recent decades is reviewed.According to the introduction and discussion of rheological method,the micromechanics method and the combing method based on above two methods,the ideas and methods of the SMP constitutive modeling are summarized.Furthermore,the critical issues of the constitutive modeling of shape memory polymers may be confronted in the future that are predicted.

    参考文献
    相似文献
    引证文献
引用本文

周涛,谭惠丰.热驱动形状记忆聚合物的本构建模方法回顾[J].高分子材料科学与工程,2012,28(5):165-169. Tao Zhou, Huifeng Tan. Review on Constitutive Modeling Methods of Thermally Actuated Shape Memory Polymers[J]. Polymer Materials Science & Engineering,2012,28(5):165-169.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司