不同材料及荷载下含椭圆和圆孔树脂基复合材料板孔边应力场比较
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB332

基金项目:

国家自然科学基金资助项目(61079005);教育部科学技术研究重点项目(208082);人事部留学人员科技活动项目择优资助经费(优秀类)项目


Comparison on Hole-Edge Stress Field of Resin Matrix Composite Plates with Elliptical and Round Hole Considering Different Loads and Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对实际工程中常见的含圆孔和椭圆孔的树脂基复合材料板,建立基于Mathematica的计算模型,对带有圆形和椭圆孔的复合材料板,在不同荷载作用下进行计算,对两种孔形应力分布作比较。而且以两种不同材料含孔板为例,对不同荷载作用下的孔边应力进行计算,并对材料对孔边应力场的影响作较为全面的比较。为在实际工程中对孔形、材料以及所受外荷载进行合理选择提供理论依据。

    Abstract:

    Aimed at the common resin matrix composite plate with round or elliptical hole in practical engineering,the calculation model based on the Mathematica is set up.Through the calculation of composite plates with the round or elliptical hole under different load conditions,a comparison between two kinds of holes stress distribution is done.Moreover,taking two kinds of material for example,calculation of hole-edge stress under different load is carried out.The complete comparisons on the influence which material have on the hole-edge stress field are also carried out.It provides a theory for optimization of the structural shape and geometrical size of flywheel for energy storage.

    参考文献
    相似文献
    引证文献
引用本文

李成,铁瑛,赵华东,郑艳萍.不同材料及荷载下含椭圆和圆孔树脂基复合材料板孔边应力场比较[J].高分子材料科学与工程,2012,28(5):183-186. Cheng Li, Ying Tie, Huadong Zhao, Yanping Zheng. Comparison on Hole-Edge Stress Field of Resin Matrix Composite Plates with Elliptical and Round Hole Considering Different Loads and Materials[J]. Polymer Materials Science & Engineering,2012,28(5):183-186.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司