聚合物球晶生长过程模拟
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O631.3

基金项目:

国家自然科学基金资助项目(10872185);洛阳理工学院青年基金


Simulation of Growth Process for Polymer Spherulite
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    结晶性聚合物在熔融态冷却过程中,往往伴随着球晶的生成,球晶的密度和尺寸分布直接影响到制品的热力学、光学及力学性能。文中研究了聚合物冷却过程中球晶的形态学演变;模拟了球晶在生长过程中的形态演化过程;考察了成核诱导时间、成核密度、生长速率和碰撞对球晶形态变化的影响;比较了等温和非等温条件下聚合物的结晶过程。研究结果表明,在等温结晶过程中随着温度的降低,晶粒越来越细化,结晶程度越来越大,球晶碰撞边界为直线;非等温结晶过程中由于温度一直在降低,不断出现新的球晶,晶体大小不一,碰撞后边界为曲线。

    Abstract:

    The spherulites will be born in the crystallization process of crystalline polymer from melt.The density and dimension of spherulites have a profound effect on the polymer performance of thermodynamics,optics and mechanical behavior.In this paper,the development of spherulites morphology in quiescent crystallization process was researched and simulated.The simulations included the effect of induction time,nuclei density,growth velocity and impingment boundary on spherulites’ morphology.The crystallization process of polymer was analyzed in quiescent isothermal and non-isothermal crystallization.The results show that the rate of crystallinity increases with the decrease of the temperature,the crystalline grain is more fine,and the crystal boundary shows straight lines in the isothermal crystallization process.During non-isothermal crystallization the new spherulite is constantly emerging,the size of crystalline grain is different,and the crystal boundary shows curves.

    参考文献
    相似文献
    引证文献
引用本文

沈俊芳,闵志宇,陈静波,申长雨.聚合物球晶生长过程模拟[J].高分子材料科学与工程,2012,28(5):187-190. Junfang Shen, Zhiyu Min, Jingbo Chen, Changyu Shen. Simulation of Growth Process for Polymer Spherulite[J]. Polymer Materials Science & Engineering,2012,28(5):187-190.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司