BAMO-AMMO三嵌段共聚物的间接法合成及表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O631.3

基金项目:

总装预研项目资助(40406030101-5)


Indirect Synthesis and Characterization of BAMO-AMMO Tri-Block Copolymer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以3,3′-双溴甲基环氧丁烷(BBMO)和3-溴甲基-3’-甲基环氧丁烷(BrMMO)为单体,通过活性顺序聚合法合成了BBMO-BrMMO三嵌段共聚物,并采用相转移催化法实现了3,3′-双叠氮甲基环氧丁烷-3-叠氮甲基-3′-甲基环氧丁烷(BAMO-AMMO)三嵌段共聚物的间接法合成。探讨了溶剂的选择及叠氮化反应时间的影响:选用极性和溶度参数接近的异亚丙基丙酮为溶剂,24 h后叠氮化率为99.97%。通过核磁共振(13C-NMR)和凝胶渗透色谱(GPC)对所得产物进行了表征,结果表明,共聚物组成接近于1∶1,分子量7053,分子量分布1.47。

    Abstract:

    BBMO-BrMMO tri-block copolymer was synthesized using 3,3′-bisbromomethyloxetane(BBMO) and 3-bromomethyl-3′-methyloxetane(BrMMO) by living sequence polymerization at first,indirect synthesis of 3,3′-bisazidomethyloxetane-3-azidomethyl-3′-methyloxetane(BAMO-AMMO) tri-block copolymer was then achieved through a phase transfer catalytic method.Choose of suitable solvent and the effect of reaction time on azidation was discussed emphatically.The results show that the optimal solvent is methyl isobutenyl ketone for the similar polarity and solubility parameter.Azidation degree is 99.97% after 24 h.At the same time,the product is characterized by 13C NMR and GPC.The results show that composition of BAMO-AMMO tri-block copolymer is nearly 1∶1,the molecular weight is 7053,and the molecular weight distribution is 1.47.

    参考文献
    相似文献
    引证文献
引用本文

张弛,李杰,罗运军,葛震. BAMO-AMMO三嵌段共聚物的间接法合成及表征[J].高分子材料科学与工程,2012,28(6):5-7,11. Chi Zhang, Jie Li, Yunjun Luo, Zhen Ge. Indirect Synthesis and Characterization of BAMO-AMMO Tri-Block Copolymer[J]. Polymer Materials Science & Engineering,2012,28(6):5-7,11.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司