超支化水性聚氨酯的合成与表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.8

基金项目:

国家自然科学基金资助项目(51173001)


Synthesis and Characterization of Hyperbranched Waterborne Polyurethane
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以异佛尔酮二异氰酸酯(IPDI)、二乙醇胺(DEOA)及二羟甲基丙酸(DMPA)为原料,合成超支化聚氨酯核HBPU-0;以IPDI、聚四氢呋喃(PTMEG)及DMPA等原料合成线性聚氨酯,然后,将线性聚氨酯接枝到HBPU-0上,制备了一种具有超支化结构的水性聚氨酯,产物具有良好的水分散性和耐水性,其中HBPU-6的24h吸水率为6%,48h吸水率为11%,72h吸水率为18%。通过红外光谱对产物结构进行了表征。采用电子万用试验机和热失重分析仪对产物的性能进行测试,结果表明,所制备的水性超支化聚氨酯具有良好的力学性能和热稳定性,HBPU-6的拉伸强度为16.8MPa,热分解温度达到238℃。

    Abstract:

    The core of hyperbranched polyurethane(HBPU-0) was prepared from isophorone diisocyanate(IPDI),dimethylol propionic acid(DMPA) and diethanol amine(DEOA),and linear polyurethane was prepared from IPDI,polytetramethylene glycol(PTMEG) and DMPA.Linear polyurethane was grafted on HBPU-0,and then a stable aqueous hyperbranched polyurethane dispersion was obtained.The structures of the hyperbranched waterborne polyurethane were characterized by Fourier transform infrared(FT-IR) spectroscopy,the properties of cast film were measured by water resistance tests,tensile tests and thermal gravimetric analysis(TGA).The cast film of the resulting product(HBPU-6) exhibits good water resistance.The tensile strength of HBPU-6 is 16.8 MPa and the decomposition temperature is 238 ℃.

    参考文献
    相似文献
    引证文献
引用本文

梅锦岗,杨建军,吴明元,吴庆云,张建安,王云云.超支化水性聚氨酯的合成与表征[J].高分子材料科学与工程,2012,28(6):16-20. Jingang Mei, Jianjun Yang, Mingyuan Wu, Qingyun Wu, Jian’An Zhang, Yunyun Wang. Synthesis and Characterization of Hyperbranched Waterborne Polyurethane[J]. Polymer Materials Science & Engineering,2012,28(6):16-20.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司