热处理对β-PPR和高熔体流动速率β-PPR结晶性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ325.14

基金项目:

福州大学科技发展基金(2011-XY-1)


Effect of Annealing on the Crystallization Properties of β-PPR and High MFR β-PPR
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过添加稀土β成核剂和过氧化物获得β-PPR和高熔体流动速率β-PPR。运用差示扫描量热仪(DSC)和X射线衍射仪(XRD)研究了熔体流动速率对结晶性能的影响。结果表明,过氧化物的加入使β-PPR中β晶含量降低。将无规共聚聚丙烯(PPR)、β-PPR和高熔体流动速率β-PPR分别在80℃~120℃热处理1 h,随热处理温度升高,PPR的结晶度持续升高,而β-PPR和含过氧化物的β-PPR结晶度呈现先升高后降低的趋势。在研究温度范围内,随热处理温度升高,各样品中β晶含量降低。

    Abstract:

    β-form propylene-ethylene random copolymer(PPR) and high melt flow rate(MFR)β-PPR were pre- pared by the addition of rare earthβnucleating agent and peroxide into PPR.Effect of MFR on crystallization proper- ties ofβ-PPR was studied by means of differential scanning calorimetry(DSC) and X-ray diffraction(XRD).It was found that the introduction of peroxide decreased the content ofβcrystal.PPR,β-PPR and high MFRβ-PPR were annealed at 80℃to 120℃for 1 h.The results show that with the increase of annealing temperature,the crystallin-i ty of pure PPR increases,while the crystallinity ofβ-PPR and high MFRβ-PPR increase first and then decrease.The content ofβcrystal decreases with annealing temperature.

    参考文献
    相似文献
    引证文献
引用本文

曹静,吕秋丰.热处理对β-PPR和高熔体流动速率β-PPR结晶性能的影响[J].高分子材料科学与工程,2012,28(6):32-35. Jing Cao, Qiufeng Lv. Effect of Annealing on the Crystallization Properties of β-PPR and High MFR β-PPR[J]. Polymer Materials Science & Engineering,2012,28(6):32-35.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司