双向复合应力场挤出成型双向增强SGF/HDPE/PP管材的结构与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB332

基金项目:

国家自然科学基金资助项目(10590351);重庆市科技攻关计划资助项目(CSTC,2010AC4062)


Structure and Properties of Two-Dimensional Reinforcement SGF/HDPE/PP Pipes Extruded by Two-Dimensional Compound Stress Field Pipe-Extrusion Die
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用自行设计制造的剪切拉伸双向复合应力场挤管装置生产出了双向增强的短玻璃纤维/高密度聚乙烯/聚丙烯(SGF/HDPE/PP)管材,研究分析了应力场对复合体系管材的拉伸强度、微观分子取向和结晶的影响。结果表明,在200℃以下时,该应力场能改善管材的强度,在保持管材轴向拉伸强度不降低的情况下,其周向拉伸强度的最高改善量达到40.9%,且随着温度的升高而逐渐提高;分子的结晶度也随着温度和转速的升高而增加;同时该应力场促进了分子的取向分布,但分子的解取向效应却随着温度的升高而变得更加严重。

    Abstract:

    Utoizing shearing-drawing two-dimensional compound stress field pipe-extrusion die developed by the authors,two-dimensional reinforcement short glass fiber/high density polyethylene/polypropylene(SGF/HDPE/PP) pipes were extruded.The tensile strength,molecule orientation and crystallinity were studied.The results indicate that,when the temperature is below 200 ℃,the tensile strength of SGF/HDPE/PP pipes is improved by shearing-drawing two-dimensional compound stress field.The most improvement of circular tensile strength is 40.9% and the axial tensile strength doesn’t decrease.And the circrlar tensie strength increase with the increase of temperature.Molecule crystallinity increases with the temperature and rotating speed rising too.The compound stress field makes molecule orientation.But the molecule disorientation becomes more obvious with temperature increasing.

    参考文献
    相似文献
    引证文献
引用本文

袁毅,徐绍虎,张贤明,崔爽,申开智.双向复合应力场挤出成型双向增强SGF/HDPE/PP管材的结构与性能[J].高分子材料科学与工程,2012,28(6):69-71. Yi Yuan, Shaohu Xu, Xianming Zhang, Shuang Cui, Kaizhi Shen. Structure and Properties of Two-Dimensional Reinforcement SGF/HDPE/PP Pipes Extruded by Two-Dimensional Compound Stress Field Pipe-Extrusion Die[J]. Polymer Materials Science & Engineering,2012,28(6):69-71.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司