剪切场下少量碳纳米管对HDPE结晶结构和性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB383.1

基金项目:

国家自然科学基金资助项目(50903054)


Effect of a Small Amount of Carbon Nanotubes on the Crystalline Structure and Properties of HDPE Under Shear Flow
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过动态保压注塑成型装置研究剪切场下少量多壁碳纳米管(MWCNTs)对高密度聚乙烯(HDPE)的结晶结构和性能的影响。拉伸测试结果表明,普通注塑成型下MWCNTs含量为1.8%的HDPE/MWCNTs与纯HDPE相比,拉伸强度从28MPa增加到30MPa,冲击强度由22 kJ/m2提高至29 kJ/m2;而剪切场下成型的HDPE和HDPE/MWCNTs样品,其拉伸强度分别达到49MPa和63MPa,同时冲击强度分别为54kJ/m2和69kJ/m2。微观扫描分析显示,普通成型下的HDPE和HDPE/MWCNTs制品内部均呈现出无序的结晶结构,而剪切场下成型的制品内部结晶排列规整,均有串晶状的结晶结构产生。尤其在HDPE/MWCNTs制品中,发现了片晶附生于MWCNTs表面而形成杂化的串晶结构。以上的结果表明,在剪切场下MWCNTs可以明显影响HDPE的结晶和力学性能。

    Abstract:

    The effect of a small amount of multi-walled carbon nanotubes(MWCNTs) on the crystalline structure and properties of high-density polyethylene(HDPE) was studied using a dynamic-packing injection molding machine.Tensile testing results show that,under conventional injection molding,the tensile strength of both pure HDPE and HDPE/MWCNTs composite(1.8% MWCNTs) is 28 MPa to 30 MPa,respectively;the corresponding impact strength is 22 kJ/m2 and 29 kJ/m2.For HDPE and HDPE/MWCNTs molded under shear flow,the tensile strength is 49 MPa and 63 MPa, respectively,and the corresponding impact strength is 54 kJ/m2 and 69 kJ/m2.The scanning electron microscopy measurements results illustrate that lamellae is randomly distributed in both pure HDPE and HDPE/MWCNTs under conventional injection molding.However,some shish-kebab-like objects were formed under shear flow.Especially in HDPE/MWCNTs,the hybrid crystalline structures were formed due to the epitaxial growth.The above experimental results demonstrate that MWCNTs may affect the crystallization of HDPE and its mechanical properties under shear flow.

    参考文献
    相似文献
    引证文献
引用本文

邓聪,高雪芹,王荣飞,胡娟,申开智.剪切场下少量碳纳米管对HDPE结晶结构和性能的影响[J].高分子材料科学与工程,2012,28(6):85-88. Cong Deng, Xueqin Gao, Rongfei Wang, Juan Hu, Kaizhi Shen. Effect of a Small Amount of Carbon Nanotubes on the Crystalline Structure and Properties of HDPE Under Shear Flow[J]. Polymer Materials Science & Engineering,2012,28(6):85-88.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司