HDPE在高压毛细管挤出过程中的温度窗口效应
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ325.12

基金项目:

国家自然科学基金资助项目(51003067);中央高校基本科研业务费资助


The Temperature Window Effect of High-Density Polyethylene During High-Pressure Capillary Extrusion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    对三种不同类型高密度聚乙烯(HDPE)进行高压毛细管挤出,均发现特殊的温度窗口效应,线性均聚5000S在v=8mm/min时的温度窗口为145℃~150℃;己烯共聚HXM TR-571在v=1mm/min时的窗口为150℃~153℃;双峰型GC100S在v=5mm/min的窗口为143℃~145℃,温度窗口内挤出压力骤降至最小值,挤出平稳,挤出物表面光滑,避免了压力振荡和变形,窗口与PE的分子量、支化度和柱塞速率有关。效应产生的原因是在温度窗口内发生了PE晶形相转变。不同挤出温度挤出物的差示扫描量热(DSC)分析表明,HXM TR-571和GC100S在窗口温度下挤出物具有较高的结晶温度(Tc)和较低熔点(T(m 2))。

    Abstract:

    In the paper,three different types of high-density polyethylene(HDPE) had been extruded in the high-pressure capillary.During the extrusion,it was founded that the temperature windows of linear polyethylene 5000S,copolymer HXM TR-571 and bimodal polyethylene GC100S were 145 ℃~150 ℃(piston velocity(v) = 8 mm/min),150 ℃~153 ℃(v=1 mm/min) and 143 ℃~145 ℃(v=5 mm/min),respectively.When the pressure of extrusion dropped dramatically to a minimum within temperature window,the extrusion became stable and smooth,avoiding the oscillations and distortions.The temperature window,being in a close relation to molecular weight,degree of branching and v,was the consequence of a phase transformation at the particular temperature within the orifice of the capillary.Differential scanning calorimeters(DSC) thermal analysis of the extrudates under different temperature show that the extrudates of HXM TR-571 and GC100S within the temperature window have higher crystalline temperature(Tc) and lower melting points(T(2)m).

    参考文献
    相似文献
    引证文献
引用本文

黄东,李言,盖景刚,曹亚. HDPE在高压毛细管挤出过程中的温度窗口效应[J].高分子材料科学与工程,2012,28(6):102-106. Dong Huang, Yan Li, Jinggang Gai, Ya Cao. The Temperature Window Effect of High-Density Polyethylene During High-Pressure Capillary Extrusion[J]. Polymer Materials Science & Engineering,2012,28(6):102-106.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司