静电纺丝法制备定向排列微/纳米纤维及其机理
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB383.1

基金项目:

陕西省重点学科专项建设资金(陕教资[2008]169)


Preparation of Aligned Nanofiber Assembly Through Electrospinning and Its Mechanism
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    借助于高速摄影机"快摄慢放"的技术观察静电纺泰勒锥-射流区域的细节变化,在保证溶液供应量和射流喷射量一致而达到稳定纺丝的基础上,利用常规平面铝板作为接收装置获得了高度定向排列的微/纳米纤维集合体。结果表明,纤维的基本定向原理为在溶液浓度相对较大的情况下,射流的鞭动不稳定性较小,而且会以电势梯度最大方向为轴发生高速旋转,在高速旋转的过程中射流容易被拉直而形成定向排列纤维阵列。

    Abstract:

    Detail changes for the zone of Taylor cone-jet during the electrospinning process were observed by the technique of "snapshot and slow playing" possessed by the high-speed camera.Based on the consistence of solution supply and injection mass to ensure a stable spinning,a conventional plane aluminum plate was successfully used as the collecting device to obtain a highly-aligned nanofiber assembly.The results show that the electrospinning jet with a minor whipping instability for the solution with a relatively large concentration can rotate with a high speed around the direction of the maximum electric force gradient.The electrospinning jet with a minor whipping instability is easy to be stretched during high-speed rotation and forms aligned nanofiber assembly.

    参考文献
    相似文献
    引证文献
引用本文

刘呈坤,来侃,孙润军,陈美玉.静电纺丝法制备定向排列微/纳米纤维及其机理[J].高分子材料科学与工程,2012,28(6):117-120. Chengkun Liu, Kan Lai, Runjun Sun, Meiyu Chen. Preparation of Aligned Nanofiber Assembly Through Electrospinning and Its Mechanism[J]. Polymer Materials Science & Engineering,2012,28(6):117-120.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司