潜伏性热释放2PZ-PS-co-MAA微胶囊固化剂的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.5

基金项目:

国家自然科学基金资助项目(50773063);国家973计划项目(2010CB635111);西北工业大学基础研究基金(G9KY1020);研究生创业种子基金(Z2010076)资助项目


Preparation and Performance of Heat Released 2PZ-PS-co-MAA Microcapsule-Type Latent Curing Agent
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以2-苯基咪唑(2PZ)为芯材,苯乙烯-甲基丙烯酸共聚物(PS-co-MAA)为壁材,采用溶剂挥发技术,成功地制备了一种新型潜伏性热释放2PZ-PS-co-MAA微胶囊固化剂。通过红外光谱仪(FT-IR)、热重分析仪(TGA)、扫描电子显微镜(SEM)、粒度分析仪和差示扫描量热仪(DSC)对微胶囊固化剂的化学结构、芯材含量、表面形貌、粒径分布及固化性能等进行了表征。所制备的微胶囊固化剂表面光滑,粒径分布较窄,平均粒径约为15.60μm,壁材厚度约为0.5μm,芯材2PZ含量约为39.19%。由微胶囊固化剂与环氧树脂E-51制备的单组分胶粘剂,具有优良的固化特性和潜伏性能,可在100℃,30 min内实现固化,室温储存期可达32 d以上。

    Abstract:

    A heat released microcapsule-type latent curing agent was successfully prepared by solvent evaporation technique with 2-phenylimidazole(2PZ) as the core material and styrene/methacrylic acid copolymer(PS-co-MAA) as the wall material.The chemical structure,core material content,surface morphology,size distribution and curing characteristics of this microcapsule-type curing agent were characterized by Fourier transform infrared spectrum(FT-IR),thermogravimetric analysis(TGA),scanning electron microscope(SEM),granulometer and differential scanning calorimetry(DSC).The obtained microcapsules have a smooth surface and display a narrow size distribution with the mean size about 15.60 μm,and its wall thickness is about 0.5 μm with core material content about 39.19%.In addition,the one-component adhesive made from the microcapsules and epoxy resin E-51 shows advanced curing characteristics and latent properties.It is found that the E-51/PS-co-MAA microcapsule system can be cured at 100 ℃ in 30 min and its shelf life at room temperature is more than 32 days.

    参考文献
    相似文献
    引证文献
引用本文

史有强,张秋禹,陈少杰,马明亮,马爱洁,顾军渭.潜伏性热释放2PZ-PS-co-MAA微胶囊固化剂的制备与性能[J].高分子材料科学与工程,2012,28(6):134-137. Youqiang Shi, Qiuyu Zhang, Shaojie Chen, Mingliang Ma, Aijie Ma, Junwei Gu. Preparation and Performance of Heat Released 2PZ-PS-co-MAA Microcapsule-Type Latent Curing Agent[J]. Polymer Materials Science & Engineering,2012,28(6):134-137.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司