聚合物熔体复合挤出胀大过程的数值模拟及可恢复弹性形变分析
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ320.663

基金项目:

国家自然科学基金资助项目(50403009);山东大学自主创新基金(2010TS096)


The Numerical Analysis of Die Swell and Recoverable Elastic Strain in Polymer Coextrusion Process
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    建立了两种聚合物熔体流经矩形流道共挤出的三维数值计算模型,采用有限元方法数值模拟了共挤出成型过程及胀大过程,得到了速度场、压力场、应力场,并利用数值计算方法得到了共挤出流动过程的可恢复弹性形变场,分析了挤出胀大率以及可恢复弹性形变的变化过程。结果表明,在共挤出流动的胀大段,共挤出界面的形状和位置发生了改变;经矩形流道共挤出得到的挤出胀大末端截面形状为不对称的鼓形;在共挤出界面附近可恢复弹性形变值存在极值,运用数值方法计算可恢复弹性形变可以对流动过程中可能存在的缺陷进行预测。

    Abstract:

    The three-dimensional numerical simulation model including the die swell zone of two polymer melts flowing through the rectangle path was founded.The coextrusion process with die swell was simulated used the finite element method.The velocity,pressure and stress field of the fluids were got.Based on the finite element simulation data,the die swell rate and recoverable elastic strain were calculated.The die swell process and the change of recoverable elastic strain were studied.It is found the coextrusion interface would be changed during the extrusion swell process.Due to the difference of material characteristic of the two polymers,the end section shape of coextrusion is dissymmetric drum.The simulation results show that the die swell rate differs in different direction.The extreme value of recoverable elastic strain occur close-to the coextrusion interface.It is feasible to forecast the defect by calculating recoverable elastic strain using numerical method.

    参考文献
    相似文献
    引证文献
引用本文

张敏,黄传真,孙胜,贾玉玺,梁天将.聚合物熔体复合挤出胀大过程的数值模拟及可恢复弹性形变分析[J].高分子材料科学与工程,2012,28(6):176-179,185. Min Zhang, Chuanzhen Huang, Sheng Sun, Yuxi Jia, Tianjiang Liang. The Numerical Analysis of Die Swell and Recoverable Elastic Strain in Polymer Coextrusion Process[J]. Polymer Materials Science & Engineering,2012,28(6):176-179,185.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司