聚丙撑碳酸酯的熔融流变特性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ317

基金项目:

化学工程联合国家重点实验室开放课题资助(SKL-ChE-10D05)


The Melt Rheology of Poly(Propylene Carbonate)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了不同分子量的聚丙撑碳酸酯(PPC)的熔融流变行为。流变分析表明,在流变测试过程(140℃~170℃)中PPC结构稳定;通过时温等效原理(TTS)得到了150℃的动态模量主曲线;随着分子量的增加,PPC的线性粘弹区范围增大,剪切变稀行为明显,高分子链松弛时间延长。PPC的流变行为符合"Cox-Merz"规则,由此可以通过动态测试获得高剪切速率下的PPC稳态粘弹特性。由Carreau-Yasuda(Osc)公式得到PPC的零切黏度(η0),确定了η0与分子量之间的关系为η0∝-Mw2.8。

    Abstract:

    The melt rheology of poly(propylene carbonate)(PPC) with different molecular weight was investigated.The results show that the melt microstructure of PPC is stable during the rheological testing period(140 ℃~170 ℃).Meanwhile,the master curves,which were obtained using the time-temperature superposition(TTS) at 150 ℃,suggests that the shear thinning behaviors are more obvious and the disentangle time of polymer chains increases with molecular weight.Steady shear modulus could be obtained from dynamic modulus values according to the Cox-Merz rule.The relationship between zero shear viscosity obtained using Carreau-Yasuda(Osc) model,and molecular weight is η0∝2.8w.

    参考文献
    相似文献
    引证文献
引用本文

曹聪,袁来深,冯连芳,王嘉骏,顾雪萍.聚丙撑碳酸酯的熔融流变特性[J].高分子材料科学与工程,2012,28(7):18-21. Cong Cao, Laishen Yuan, Lianfang Feng, Jiajun Wang, Xueping Gu. The Melt Rheology of Poly(Propylene Carbonate)[J]. Polymer Materials Science & Engineering,2012,28(7):18-21.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司