混合季戊四醇己二酸酯对PVC的辅助热稳定作用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ325.3

基金项目:

中山市产学研结合项目(2009CXY033);广州市科技支撑计划项目(2010J-D00371)


Auxiliary Thermal Stabilizing Effect of Mixed Pentaerythritol Ester on Poly(Vinyl Chloride)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以双季戊四醇(DPET)、季戊四醇(PET)两种多元醇与己二酸部分酯化合成混合季戊四醇己二酸酯(MixPETE)。采用差示扫描热分析(DSC)研究了MixPETE的熔融温度,在DPET、PET、己二酸三者质量比为41/32/27时,所生成的MixPETE熔点从双季戊四醇己二酸酯的184.8℃降到151.1℃。采用烘箱法和转矩流变仪法研究MixPETE与硬脂酸锌/硬脂酸钙复合对聚氯乙烯(PVC)的热稳定作用,结果表明,反应物中采用了20%、27%、32%PET所生成的Mix-PETE对PVC的静态和动态热稳定作用与双季戊四醇己二酸酯十分相近,随PET用量的增加,对PVC的内润滑作用降低,外润滑作用则增强。

    Abstract:

    Mixed pentaerythritol ester(MixPETE) was synthesized by a partial esterification of dipentaerythritol(DPET) and pentaerythritol(PET) with adipic acid.The melting point of the MixPETE prepared from a 41/32/27 mass ratio of DPET/PET/adipic acid reduces from 184.8 ℃ of dipentaerythritol ester to 151.1℃ according to the differential scanning calorimeter(DSC) results.Oven method and HAAKE rheometer were used to investigate the static and dynamic thermal stabilizing effect of MixPETE and CaSt2/ZnSt2 on poly(vinyl chloride)(PVC).Three kinds of MixPETE with the PET content of 20%,27% and 32% exhibit almost similar stabilizing effect like dipentaerythritol ester.The internal lubrication of MixPETE reduces with the amount of PET increasing while the external lubrication enhances.

    参考文献
    相似文献
    引证文献
引用本文

刘述梅,段富华,姜蕾,赵建青,李绪邦.混合季戊四醇己二酸酯对PVC的辅助热稳定作用[J].高分子材料科学与工程,2012,28(7):43-46. Shumei Liu, Fuhua Duan, Lei Jiang, Jianqing Zhao, Xubang Li. Auxiliary Thermal Stabilizing Effect of Mixed Pentaerythritol Ester on Poly(Vinyl Chloride)[J]. Polymer Materials Science & Engineering,2012,28(7):43-46.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司