不同熔体流动速率的SA型透明尼龙的流变性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.6

基金项目:


The Rheological Property of SA Type Transparent Nylon with Different Melt Flow Rate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用固相后缩聚方法制备了一系列熔体流动速率不同的SA型透明尼龙(SATN),采用毛细管流变仪对其流变性能进行了研究,并讨论了熔体流动速率对其流变性能的影响。研究结果表明,SATN熔体属假塑性流体,表观黏度随着剪切速率的升高而降低;随着熔体流动速率的减小,SATN的非牛顿性增强,熔体黏度增大,对剪切速率的敏感性增强,但是对温度的敏感性减弱。

    Abstract:

    Semi-aromatic transparent nylons(SATN) with different melt flow rate were prepaed by solid state polycondensation at different temperature.The effect of melt flow rate on the rheological behavior of SATN was analyzed with the capillary rheometer.The results show that non-Newtonian index of SATN is less than 1,implying the pseudoplastic nature of SATN in the molten state.The shear viscosity decreases with the increase of the shear rate.With the decrease of the melt flow rate of SATN,the non-Newtonian index decreases,and the apparent viscosity augments and becomes less sensitive to the temperature but more sensitive to the share rate.

    参考文献
    相似文献
    引证文献
引用本文

蒋爱云,李新法,陈金周,牛明军.不同熔体流动速率的SA型透明尼龙的流变性能[J].高分子材料科学与工程,2012,28(7):64-66,71. Aiyun Jiang, Xinfa Li, Jinzhou Chen, Mingjun Niu. The Rheological Property of SA Type Transparent Nylon with Different Melt Flow Rate[J]. Polymer Materials Science & Engineering,2012,28(7):64-66,71.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司