有机硅高沸物水解物作为塑料填料的应用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ320.4

基金项目:


Hydrolyzed Organosilicon High-Boiling Residues Used as Plastic Filler
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    水解有机硅高沸物制盐酸的过程会产生大量高度交联的聚硅氧烷固体残渣,利用该残渣与塑料的相容性,将其作为填料加入其中,达到增量与降低成本的目的。文中以低密度聚乙烯(LDPE)为例,对有机硅高沸物水解物/LDPE复合材料的力学、燃烧与耐候性能进行了研究。结果表明,有机硅高沸物水解物填料在基材LDPE中的填充量为20%时,复合材料性能较优。此时,材料的拉伸强度与断裂伸长率分别降低14.05%和34.00%,燃烧速率略有降低;而硬度提高9.03%,弯曲强度提高16.82%,热稳定性与耐候性也有所提高。

    Abstract:

    During the preparation of hydrochloride by hydrolyzing the organosilicon high boiling residues,a large number of solid residue is generated as by-product.Since the solid residue is compatible with plastic,it was add to the plastic material,in order to increase the quantity and lowering the cost.Base material in this research was low density polyethylene(LDPE),a series of LDPE/organosilicon high-boiling hydrolyzate composites with different mass ratio were prepared,also their mechanical,combustion and weathering performance have been studied.Further more the feasibility of hydrolyzed organosilicon high-boiling residues for plastic filler was discussed.When the hydrolyzed organosilicon high-boiling residues content is 20%,the composite has better comprehensive properties than others.At this point,the tensile strength and elongation at break of composite decrease 14.05% and 34.00% respectively.However its hardness increases by 9.03%,bending strength increases by 16.82%,thermal stability and weathering performance are also improved.

    参考文献
    相似文献
    引证文献
引用本文

王伟文,高扬,段继海,李建隆.有机硅高沸物水解物作为塑料填料的应用[J].高分子材料科学与工程,2012,28(7):87-90. Weiwen Wang, Yang Gao, Jihai Duan, Jianlong Li. Hydrolyzed Organosilicon High-Boiling Residues Used as Plastic Filler[J]. Polymer Materials Science & Engineering,2012,28(7):87-90.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司