壳聚糖/阳离子聚丙烯酰胺水分散聚合物的制备
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ316.3

基金项目:

国家自然科学基金资助项目(20876081)


Preparation of Chitosan/CPAM via Aqueous Dispersion Polymerization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以水溶性壳聚糖(Cts)作为新型分散剂,甲基丙烯酰氧乙基三甲基氯化铵(DMC)和丙烯酰胺(AM)为单体原料,偶氮二异丁基脒二盐酸盐(V-50)为引发剂,采用水分散聚合技术合成了壳聚糖/阳离子聚丙烯酰胺聚合物(Cts/CPAM),探讨了反应条件对聚合物分子量的影响。结果发现,单体质量分数为3.75%~4.25%、AM∶DMC(质量比)为9∶4、分散剂质量分数为1.5%~1.75%、无机盐质量分数为10.0%~17.5%、引发剂质量分数为0.0035%~0.0045%、反应温度为55℃~60℃时,分散聚合体系稳定,所制备聚合物的分子量较高。

    Abstract:

    Using chitosan(Cts) as new dispersant,methacrylatoethyl trimethyl ammonium chloride(DMC) and acrylamide(AM) as the source monomers,2,2′-azobis(2-methylpropionamide) dihydrochloride(V-50) as initiator,the aqueous dispersion copolymer of Cts/ cationic polyacrylamide(CPAM) was synthesized.The effects of the reaction parameters on the molecular weight were investigated.The results show that the dispersion polymerization system is steady and the molecular weight is higher when the dosage of monomer is 3.75%~4.25%,AM∶DMC(mass ratio) 9∶4,dispersant 1.5%~1.75%,inorganic salt 10.0%~17.5%,initiator 0.0035%~0.0045% and reaction temperature is 55 ℃~60 ℃ in the process of aqueous dispersion polymerization.

    参考文献
    相似文献
    引证文献
引用本文

聂宗利,武玉民,刘娟,许军,梁昌娟.壳聚糖/阳离子聚丙烯酰胺水分散聚合物的制备[J].高分子材料科学与工程,2012,28(7):112-115. Zongli Nie, Yumin Wu, Juan Liu, Jun Xu, Changjuan Liang. Preparation of Chitosan/CPAM via Aqueous Dispersion Polymerization[J]. Polymer Materials Science & Engineering,2012,28(7):112-115.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司