SPPESK/SPEEK共混质子交换膜的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TM911.4

基金项目:

国家自然科学基金资助项目(20976027)


Preparation and Properties of Sulfonated Poly(Phthalazinone Ether Sulfone Ketone)/Sulfonated Poly(Ether Ether Ketone) Blend Proton Exchange Membrane
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以耐溶胀性能较好的磺化聚芳醚砜酮(SPPESK)和吸水性较强的磺化聚醚醚酮(SPEEK)为原料,制备了SPPESK/SPEEK共混质子交换膜。考察了共混膜的水吸收率,水溶胀度,甲醇水溶胀度,甲醇渗透率及质子传导率和力学性能。80℃时,共混膜具有适当的水吸收(101%)和溶胀度(34%),较低的甲醇水溶胀度(20%),较高的质子传导率(0.212 S/cm),与SPPESK膜相比,质子传导率提高了18%。SPEEK的加入改善了共混膜的柔韧性,断裂拉伸应变从16.48%提高到30.43%。

    Abstract:

    The sulfonated poly(phthalazinone ether sulfone ketone)(SPPESK) with low swelling rate and the sulfonated poly(ether ether ketone)(SPEEK) with good water uptake were used to prepare SPPESK/SPEEK blend proton exchange membrane.The water uptake,swelling rate,methanol permeability,proton conductivity and mechanics of the blend membranes were investigated.The results show that the water uptake and swelling rate of the SPPESK/SPEEK blend membrane are 101% and 34% at 80 ℃,respectively.The methanol swelling rate of the blend membrane is 20% at 80 ℃.The proton conductivity of the blend membrane is 0.212 S/cm at 80 ℃,which is 18% higher than that of SPPESK membrane.The flexibility of the blend membrane is better than that of SPPESK membrane.The intorduction of SPEEK makes the tensile strain of the blend membrane increase from 16.48% to 30.43%.

    参考文献
    相似文献
    引证文献
引用本文

杜立广,吴雪梅,焉晓明,贺高红. SPPESK/SPEEK共混质子交换膜的制备与性能[J].高分子材料科学与工程,2012,28(7):148-151. Liguang Du, Xuemei Wu, Xiaoming Yan, Gaohong He. Preparation and Properties of Sulfonated Poly(Phthalazinone Ether Sulfone Ketone)/Sulfonated Poly(Ether Ether Ketone) Blend Proton Exchange Membrane[J]. Polymer Materials Science & Engineering,2012,28(7):148-151.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司