嵌入式行星螺杆挤出机内三维流动数值模拟
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ315

基金项目:

国家自然科学基金资助项目(10972076);广东省自然科学基金资助项目(10151030007000001,101510300070004610)


Simulation of the Three-Dimensional Flow in Embedded Planet-Screw Extruder
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于有限体积方法,对嵌入式行星单螺杆熔体输送段流场进行三维等温数值模拟。通过简化的物理模型来模拟行星螺杆复杂的几何结构,使用用户自定义程序设定了行星螺杆运动的边界条件。通过对嵌入式行星螺杆挤出机内螺槽压力、速度、形变速率张量、拉伸强度的分析,表明行星螺杆速度都有周期性的波动,嵌入式行星螺杆平均形变速率更高并且伴有强的拉伸场作用。通过停留时间分布曲线分析,嵌入式行星螺杆内物料停留时间分布曲线较普通单螺杆更窄,同等转速下产量更高。

    Abstract:

    The numerical simulations of three-dimensional isothermal flow in a embedded planet-screw is carried out using finite-volume approach.The boundary conditions of planet screws were imposed by user define function(UDF) developed by ourselves.The distributions of the velocity,pressure obtained from the strain rate and residence time distribution(RTD) are investigated for single-screw and planet-screw.Compared with the conventional single-screw extruder,the planet-screw leads to perturbation on the flow field and the material elements are suffered higher strain rate and elongation effect.After analysis the residence time distribution curve,it is found that the residence time distribution in the planet-screw is narrower than in the conventional single-screw extruder,so the planet-screw can has a higher output with the better extrusion characteristic performance.

    参考文献
    相似文献
    引证文献
引用本文

王小龙,徐百平,刘跃军,王玫瑰,喻慧文.嵌入式行星螺杆挤出机内三维流动数值模拟[J].高分子材料科学与工程,2012,28(7):171-174. Xiaolong Wang, Baiping Xu, Yuejun Liu, Meigui Wang, Huiwen Yu. Simulation of the Three-Dimensional Flow in Embedded Planet-Screw Extruder[J]. Polymer Materials Science & Engineering,2012,28(7):171-174.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司