氟硅改性丙烯酸酯无皂乳液的制备及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O631.3

基金项目:

国家自然科学基金资助项目(50973057);陕西省13115重点工程项目(2009ZDKG-02);陕西省教育厅专项基金(2010JK436);陕西科技大学科研启动基金(BJ11-10)


Preparation and Performances of Fluorosilicon-Modified Acrylate Soap-Free Emulsion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以纳米SiO2(Nano-SiO2)、γ-甲基丙烯酰氧乙基三甲氧基硅烷(KH570)、全氟烷基乙基丙烯酸酯(FM))等为主要原料,通过KH570改性纳米SiO2后,与FM等乙烯基单体共聚,制得了既含氟又含硅的丙烯酸酯有机/无机杂化无皂乳液。通过FT-IR、AFM及接触角测量等手段研究了共聚物的结构及性能。结果表明,氟硅单体均参与了共聚反应;乳胶膜耐热稳定性及残炭率均得以提高;加入SiO2后,涂膜凸起峰的高度和致密程度提高;当w(FM)=30%,w(SiO2)=0.5%时,涂膜对水及液体石蜡的接触角分别为125°及110°;激光粒度分布仪(DLS)分析表明,乳液平均粒径为98.37 nm。

    Abstract:

    The organic/inorganic hybrid fluorosilicon-modified copolymer acrylate emulsion was prepared via soap-free emulsion copolymerization of SiO2 modified by γ-methacryloxypropyl trimethoxy silane(KH570),perfluorinated alkyl ethyl acrylate(FM) and other vinyl agents.The structures and properties of the copolymer were characterized by FT-IR,AFM and contact angle(CA),etc.The results show that the fluorinated and siloxane monomers have participated in the reaction;the heat stability and char yield of the film are improved;the roughness and density of the latex particles increase by SiO2 addition;the contact angles of water and liquid paraffin on the copolymer films are 125° and 110° when w(FM) is 30%,w(SiO2) is 0.5%;the laser particle size distribution device analysis shows the average particle size is about 98.37nm.

    参考文献
    相似文献
    引证文献
引用本文

白小慧,沈一丁,李培枝,杨晓武.氟硅改性丙烯酸酯无皂乳液的制备及性能[J].高分子材料科学与工程,2012,28(8):18-21. Xiaohui Bai, Yiding Shen, Peizhi Li, Xiaowu Yang. Preparation and Performances of Fluorosilicon-Modified Acrylate Soap-Free Emulsion[J]. Polymer Materials Science & Engineering,2012,28(8):18-21.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司