嵌段共聚物PCL-b-PMMA薄膜的微相分离形貌
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O631.3

基金项目:

国家自然科学基金资助项目(20674032)


Microphase Separation and Morphology of PCL-b-PMMA in Thin Films
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过开环聚合(ROP)和原子转移自由基聚合(ATRP)制备了不同嵌段结构的嵌段共聚物PCL-b-PMMA,使用核磁共振(1H-NMR)和凝胶渗透色谱(GPC)对其结构进行了表征,通过原子力显微镜(AFM)研究了嵌段共聚物薄膜的微相分离形貌。结果表明,嵌段共聚物发生了微相分离,聚ε-己内酯(PCL)链段形成柱状微区;PCL链段体积分数较低时,薄膜表面以聚甲基丙烯酸甲酯(PMMA)链段聚集为主,但未在PCL柱状微区上方形成覆盖,从而在薄膜表面形成孔洞;随PCL链段体积分数增加及PMMA链段分子量下降,PCL柱状微区面积增加,向薄膜表面迁移并逐渐形成覆盖,造成薄膜表面孔洞消失。

    Abstract:

    Diblock copolymers of ε-caprolactone methyl methacrylate(PCL-b-PMMA) with different block ratio and chain length of the block were prepared by ring-opening polymerization of ε-caprolactone,following atom transfer radical polymerization(ATRP) of methyl methacrylate,initiated with PCL-Br.The structures of the copolymers were characterized by 1H nuclear magnetic resonance spectrum(1H-NMR) and gel permeation in chromatography(GPC).Atomic force microscope(AFM) was used to investigate the morphologies of the block copolymers in thin films.It was found that microphase separation occurred for all block copolymers,and cylindrical morphology of PCL microdomains was formed.For PCL-b-PMMA with lower volume fraction of PCL,most of the surface of the film was covered with PMMA segments,except for the areas on top of the PCL cylindrical microdomains,generating many holes on the surface of the film.With the increase of PCL fraction and the decrease of the length of the PMMA segments,the PCL cylindrical microdomain increased and moved towards the top of the film,and finally covered the surface.

    参考文献
    相似文献
    引证文献
引用本文

杨菁菁,徐之光,朱梦冰,俞强.嵌段共聚物PCL-b-PMMA薄膜的微相分离形貌[J].高分子材料科学与工程,2012,28(8):56-59. Jingjing Yang, Zhiguang Xu, Mengbing Zhu, Qiang Yu. Microphase Separation and Morphology of PCL-b-PMMA in Thin Films[J]. Polymer Materials Science & Engineering,2012,28(8):56-59.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司