AFM针尖在嵌段共聚物薄膜表面锻造纳米图案
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB383.2

基金项目:

国家自然科学基金资助项目(51073095)


Hammering Nano-Patterns in Block Copolymer Thin Film by AFM Tip
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    介绍了在原子力显微镜(AFM)轻敲模式下使用普通硅针尖在球形结构的苯乙烯-乙烯/丁烯-苯乙烯三嵌段共聚物(SEBS)薄膜表面锻造凹痕和凸痕纳米图案的工艺方法;从嵌段共聚物薄膜的微观结构出发,研究了SEBS薄膜表面的不同相分离形态对锻造压痕的影响,结果证实,只有六角状球形结构的薄膜才能用于制备压痕,其原因是由于该结构样品具有较低的硬度和模量;通过与均聚物PS薄膜比较得出,球形相分离形态的SEBS薄膜具有容易发生变形、压痕精度高、无边界堆积等优点。

    Abstract:

    The fabricating method for hammering imprint and embossed nano-patterns in polystyrene-block-poly(ethylene/butylenes)-block-polystyrene triblock copolymer(SEBS) thin film was introduced by using atomic force microscope(AFM) tip in tapping mode.Based on the microstructure of SEBS block copolymer thin film,the influence of different phase separation morphologies on the hammering patterns was studied in detail.The conclusion shows that only the film with well-ordered hexagonal polystyrene(PS) spherical structure can be used to generate patterns freely,which were due to for the lower hardness and modulus of the sample.Comparing with the PS film of non-phase separation by the same hammering method,the spherical SEBS film has many advantages such as easy to deform,high resolution and without edge debris etc.

    参考文献
    相似文献
    引证文献
引用本文

洪晓东,韦宝权. AFM针尖在嵌段共聚物薄膜表面锻造纳米图案[J].高分子材料科学与工程,2012,28(8):85-88. Xiaodong Hong, Baoquan Wei. Hammering Nano-Patterns in Block Copolymer Thin Film by AFM Tip[J]. Polymer Materials Science & Engineering,2012,28(8):85-88.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司