PP毛细管微挤出的表面变形及熔体黏度
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ320.1

基金项目:

江西省教育厅项目(GJJ10530);校博士启动金资助


Surface Deformation and Melt Viscosity of PP Micro-Extrusion from Capillary Rheometer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    使用毛细管流变仪系统研究了微通道中润滑剂用量及润滑剂结构对聚丙烯微挤出的表面变形及熔体黏度的影响。结果表明:(1)随石蜡用量增加,聚丙烯表面变形/黏度逐渐减小;加入正戊烷与加入石蜡的情况相同;随硅油用量增加,聚丙烯的表面变形程度/黏度先减小后增加,当加入m(硅油)/m(PP)=2/100时达到最小值。(2)180℃时加入的润滑剂为m(润滑剂)/m(PP)=2/100,石蜡和正戊烷比硅油对聚丙烯微挤出的影响大,能更好地减小聚丙烯表面变形及熔体流动的黏度。

    Abstract:

    Capillary rheometer was used to systematically study the effects of lubricants on the surface deformation and melt viscosity of PP.The results show as follows:(1)With the amount of liquid paraffin increasing,surface deformation and viscosity of PP decreased.The effect of n-pentane is similar to that of liquid paraffin.Adding silicone oil,surface deformation and melt viscosity decrease firstly,and then increase.When silicone oil amount is m(silicome)/m(PP)=2/100,inspection parameters decrease to the minimum value.(2) at 180 ℃ m(lubricants)/m(PP)=2/100,it shows that paraffin and n-pentane have greater impact on PP than silicone in oil micro-extrusion.They can more effectively decrease the surface deformation and viscosity of PP melt.

    参考文献
    相似文献
    引证文献
引用本文

肖建华,高延峰. PP毛细管微挤出的表面变形及熔体黏度[J].高分子材料科学与工程,2012,28(8):118-120. Jianhua Xiao, Yanfeng Gao. Surface Deformation and Melt Viscosity of PP Micro-Extrusion from Capillary Rheometer[J]. Polymer Materials Science & Engineering,2012,28(8):118-120.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司