利用稳态法测量聚合物薄膜纵向热导系数
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB383.2

基金项目:

科技部国际合作项目(2009DFB60160);上海市科委资助项目(10520710400,10PJ1403800,0852NM01700,08160706000)


Steady-State Measurement of Cross-Plane Thermal Conductivity in Thin Polymer Films
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在一维稳态热传导模型的基础上,设计了一套用于测量聚合物薄膜纵向热导系数的实验装置,并利用Comsol软件对该测量装置进行数值模拟并优化设计。同时利用本文设计的实验装置,测量得到了不同温度下聚酰亚胺(PI)膜、聚四氟乙烯(PTFE)膜以及混合纤维素酯(MCE)膜的热导系数。在35℃~60℃的温度范围内热导系数测量值分别维持在0.21 W/(m.K),0.26 W/(m.K),0.13 W/(m.K)左右,标准不确定度在9.5%以下。测量结果与参考值相符,验证了实验装置的测试精度。

    Abstract:

    Based on the analysis of one-dimensional heat transfer model,a measuring apparatus for cross-plane thermal conductivity of thin polymer films was designed,which was optimized by simulation analysis.In this paper thermal conductivities of polyimide(PI) membrane,polytetrafluoroethylene(PTFE) membrane and mixed cellulose ester(MCE) membrane were measured to be 0.21 W/(m·K),0.26 W/(m·K),0.13 W/(m·K) respectively at the temperature range of 35 ℃~60 ℃ and the uncertainty was below 9.5%.The experimental results and error analysis are consonant with the numerical calculation,which verifies the measuring accuracy of the designed apparatus.

    参考文献
    相似文献
    引证文献
引用本文

沈斌杰,曾志刚,沈超,胡志宇.利用稳态法测量聚合物薄膜纵向热导系数[J].高分子材料科学与工程,2012,28(8):121-124. Binjie Shen, Zhigang Zeng, Chao Shen, Zhiyu Hu. Steady-State Measurement of Cross-Plane Thermal Conductivity in Thin Polymer Films[J]. Polymer Materials Science & Engineering,2012,28(8):121-124.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司