聚(3-羟基丁酸酯-co-4-羟基丁酸酯)/酶解木质素共混材料的制备及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB324

基金项目:


Poly(3-Hydroxylbutyrate-Co-4-Hydroxylbutyrate) Blended with Cellulolytic Enzyme Lignin: Thermal,Mechanical Properties and Morphology Evaluation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    双螺杆熔融共混制备了全生物降解的聚(3-羟基丁酸酯-co-4-羟基丁酸酯)(P3HB4HB)/纤维素酶解木质素(CEL)共混物,分别用热重分析、拉伸弯曲试验、冲击试验、扫描电镜(SEM)考察了CEL含量对共混物热学、力学性能及微观形貌的影响。研究发现,CEL的加入增强了材料的热稳定性,也提高了材料的模量,但断裂伸长率、拉伸强度、弯曲强度和冲击强度平缓降低,当CEL的质量分数为20%CEL,拉伸、弯曲、冲击三种强度的保持率都大于93%;SEM显示,P3HB4HB和CEL相容很好。CEL填充P3HB4HB不仅能降低材料成本,还能对材料的热学、力学性能保持较好或起改善作用,CEL最宜添加的质量分数为20%。

    Abstract:

    Biodegradable blends of poly(3-hydroxylbutyrate-co-4-hydroxylbutyrate)(P3HB4HB) / cellulolytic enzyme lignin(CEL) were prepared via twin-screw extrusion.The effects of CEL contents on the thermal,mechanical properties and the morphology of the blends were investigated by thermogravimetry,tensile,flexible,impact test,and scanning electron microscope(SEM),respectively.It was found that,the thermal stability of the blends was enforced with CEL incorporation.Mechanical test also shows that,with increasing CEL content,the tensile and flexural modulus increase,while the elongation at break and the tensile,flexural and impact strength decrease.However,when the CEL of their original ones is at 20%.these three strengths all remain above 93%.Morphology observations by SEM reveal that the CEL and the P3HB4HB are in a good miscibility.All the results suggest that CEL,used as filler in P3HB4HB,can not only reduce the cost of P3HB4HB-based materials,but also show good retention or improvement in thermal and mechanical properties for the blends,Considering the cost and performance,the optimal content of CEL is at 20%.

    参考文献
    相似文献
    引证文献
引用本文

欧阳文竹,黄勇,罗红军,王东山.聚(3-羟基丁酸酯-co-4-羟基丁酸酯)/酶解木质素共混材料的制备及性能[J].高分子材料科学与工程,2012,28(8):156-159. Wenzhu Ouyang, Yong Huang, Hongjun Luo, Dongshan Wang. Poly(3-Hydroxylbutyrate-Co-4-Hydroxylbutyrate) Blended with Cellulolytic Enzyme Lignin: Thermal, Mechanical Properties and Morphology Evaluation[J]. Polymer Materials Science & Engineering,2012,28(8):156-159.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司