吸收型近红外滤光薄膜的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Performance of Near-Infrared Absorption Filtering Films
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚甲基丙烯酸甲酯(PMMA)为基体,近红外吸收染料NIR756和NIR858为添加剂,采用熔融混合、分散成型的方法制备了近红外吸收滤光薄膜。热失重分析(TG)表明,两种染料都具有较好的热稳定性。透射光谱显示,试样薄膜具有较好的近红外吸收性能,在660nm~930nm波段平均光透过率低于0.2%;同时具有较高的可见光透过率,在400nm~630nm波段平均光透过率高于20%。薄膜具有较好的耐热老化性能。近红外吸收染料在基材中的分散不均匀,有颗粒存在。

    Abstract:

    Near infrared absorbing filtering films were prepared by melt mixing polymethylmethacrylate(PMMA) and near infrared absorbing dyes(NIR756 and NIR858).Thermal gravimetric analysis(TG) shows that the near infrared absorbing dyes have good thermal stability.The films have good near infrared absorption measured by the spectrophotometer.The average transmittances of 660nm~930nm are lower than 0.2%;the films also have high transmission tested by the spectrophotometer,the average transmittances of 400nm~630nm are higher than 20%.The films have good thermal aging properties.The dispersion of the near infrared absorbing dyes on the surface of the film is not even.

    参考文献
    相似文献
    引证文献
引用本文

孟凡富,王庭慰,张其土,姚娇娇,曹飞,王景春.吸收型近红外滤光薄膜的制备与性能[J].高分子材料科学与工程,2012,28(8):167-169,173. Fanfu Meng, Tingwei Wang, Qitu Zhang, Jiaojiao Yao, Fei Cao, Jingchun Wang. Preparation and Performance of Near-Infrared Absorption Filtering Films[J]. Polymer Materials Science & Engineering,2012,28(8):167-169,173.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司