废PCB粉增强改性聚乙烯基木塑复合材料
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB332

基金项目:

广东省教育厅科技创新重点项目


Modifying of PE Wood-Plastic Composite with Waste Printed Circuit Board Nonmetal Powder
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过裂解色谱-质谱、X射线荧光分析分析了废印刷电路板非金属粉末(简称废PCB粉)的基本性质,并研究了废PCB粉对废聚乙烯基木塑复合材料的增强改性效果。结果表明,废PCB粉中含有约33.99%的溴化环氧树脂、约61.26%的短玻璃纤维以及约1.29%的铜。适量的废PCB粉对聚乙烯基木塑复合材料的改性效果十分突出,当用20%的PCB粉取代木粉时,可明显改善木塑复合材料的热稳定性、加工性能及力学性能,在拉伸强度、弯曲性能基本保持不变的前提下,复合材料的冲击强度提高了31.5%。

    Abstract:

    Basic properties of waste printed circuit board nonmetal powder were researched by cracking chromatography-mass spectrum,X-ray fluorescence,and modification effect of printed circuit board nonmetal powder on recycled PE wood-plastic composite was studied.The results show that there are about 33.99% of brominated epoxy resin,about 61.26% of short glass fiber and about 1.29% of copper in waste printed circuit board nonmetal powder.The modification effect was very significant.When 20% of waste printed circuit board nonmetal powder replaces wood powder,thermal stability,processing behevior,mechanical properties of the wood-plastic composites are improved significantly,tensile strength and flexural properties remain unchanged,while notched impact strength increases by 31.5%.

    参考文献
    相似文献
    引证文献
引用本文

王丰,何慧,陈继尊,贾志欣,罗远芳,贾德民.废PCB粉增强改性聚乙烯基木塑复合材料[J].高分子材料科学与工程,2012,28(8):174-177,182. Feng Wang, Hui He, Jizun Chen, Zhixin Jia, Yuanfang Luo, Demin Jia. Modifying of PE Wood-Plastic Composite with Waste Printed Circuit Board Nonmetal Powder[J]. Polymer Materials Science & Engineering,2012,28(8):174-177,182.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司