水包水CPAM乳液的合成及絮凝性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

X703.5

基金项目:


Synthesis and Flocculation Performance of Water-in-Water CPAM Emulsion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用分散聚合法制备水包水聚丙烯酰胺乳液(CPAM),通过光学显微镜研究发现,丙烯酰胺(AM)和甲基丙烯酰氧乙基三甲基氯化铵(DMC)在聚合时经历了"成核-核生长"两个阶段,CPAM以大小约690nm的球形颗粒分散在乳液中。CPAM对高岭土污水絮凝实验表明,在酸性条件下,CPAM絮凝剂絮凝效果优于中性或碱性体系,其絮凝机理是通过高分子架桥和电中和起作用。

    Abstract:

    Water in water polyacrylamide emulsion(CPAM) was prepared by dispersion polymerization.The morphological change of CPAM in dispersion polymerization process was caught by optical microscope.It is shown that the polymerization of acrylamide(AM) and 2-methylacryloylxyethyl trimethyl ammonium chloride(DMC) experiences processes of the nuclear formation and the nuclear growth.The particles size of CPAM emulsion is about 690nm and it disperses in the form of spherical shape in the emulsion.The flocculating effect of CPAM on kaolin suspensions shows that CPAM has better flocculation capacity in acidic condition than in the neutral or alkaline condition.The flocculation mechanism of CPAM is the action of bridging and electrical neutralization on kaolin suspensions.

    参考文献
    相似文献
    引证文献
引用本文

周细濠,许家友,黄佩坚,庄艳艳.水包水CPAM乳液的合成及絮凝性能[J].高分子材料科学与工程,2012,28(9):9-12. Xihao Zhou, Jiayou Xu, Peijian Huang, Yanyan Zhuang. Synthesis and Flocculation Performance of Water-in-Water CPAM Emulsion[J]. Polymer Materials Science & Engineering,2012,28(9):9-12.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司