离子液体与水的混合体系中尼龙6的解聚反应
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ320.1

基金项目:

国家自然科学基金资助项目(20777048)


Depolymerization of Nylon 6 in Mixtures of the Ionic Liquid and Water
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在150℃~230℃条件下,以氯化1-丁基-3-甲基咪唑离子液体与水组成的二元混合体系为介质进行尼龙6的解聚研究。固相残余物利用红外光谱和差示扫描量热仪进行分析。液相产物通过液相色谱-质谱联用仪和液相色谱进行定性与定量分析。建立了反应温度(A)、混合体系中离子液体的物质的量分数(B)以及反应时间(C)与ε-己内酰胺回收率(Y)之间的数学模型:Y(%)=43.76+6.69A+6.06B+3.60C+3.15AB+3.48AC-17.06A2-16.56B2-14.18C2,并利用响应曲面法(RSM)确定了解聚的优化工艺条件,即反应温度175℃、离子液体的物质的量分数14.2%及反应时间7.3h,此时ε-己内酰胺的回收率为44.4%、尼龙6的降解率为88.4%。

    Abstract:

    Depolymerization of nylon6 to ε-caprolactam was carried out in the ionic liquids and water binary mixtures from 150 to 230 ℃.The products of depolymerization were analyzed by means of infrared spectroscopy,differential scanning calorimeter,liquid chromategraphy-mass spectrometry and high performance liquid chromatography.Response surface methodology(RSM),based on three-variable-three-level Box-Behnken design(BBD),was used to determine the effects of the main parameters on nylon 6 depolymerization.A express of Y(%)=43.76+6.69A+6.06B+3.60C+3.15AB+3.48AC-17.06A2-16.56B2-14.18C2 was established to determine the yield of caprolactam at different reaction temperature(A),the ILs’ molar ratio(B),and reaction time(C).The optimal conditions for depolymerization was as follows: reaction temperature of 175 ℃,the molar ratio of IL 14.2%,and reaction time of 7.3 h.Under the condition,the yield of ε-caprolactam is 44.4% and the degradation rate of nylon 6 is 88.4%.

    参考文献
    相似文献
    引证文献
引用本文

阮如意,陈晋阳,徐天娇.离子液体与水的混合体系中尼龙6的解聚反应[J].高分子材料科学与工程,2012,28(9):28-31. Ruyi Ruan, Jinyang Chen, Tianjiao Xu. Depolymerization of Nylon 6 in Mixtures of the Ionic Liquid and Water[J]. Polymer Materials Science & Engineering,2012,28(9):28-31.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司