改性氰酸酯树脂体系的固化动力学
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ320.1

基金项目:


Curing Kinetics of Modified Cyanate Ester Resin System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用非等温差示扫描量热法(DSC)对N-(4-羟基苯基)马来酰亚胺(HPM)改性氰酸酯树脂体系的固化动力学进行了研究。分别利用无模板法中的Ozawa-Flynn-Wall法和Friedman法求得了表观活化能。根据Malek法,两参数Sestak-Berggren模型能够较好地描述固化反应机理函数,并求得了表观指前因子。其固化动力学模型为dα/dt=3.196×108exp(-85797.5/RT)α0.033(1-α)1.0747。结果表明,模型曲线和实验曲线基本吻合,但随着升温速率的提高,模型曲线开始偏离实验曲线。这是由于固化反应中官能团反应活性控制和扩散控制的相互竞争结果。

    Abstract:

    The curing kinetics of the N-(4-hydroxyphenyl)maleimide(HPM) modified cyanate ester resin system was systematically investigated by differential scanning calorimetry(DSC) under nonisothermal conditions.The apparent activation energy was calculated through the Ozawa-Flynn-Wall method and Friedman method.According to Malek method,the two-parameter Sestak-Berggren model was selected to describe curing reaction mechanisms function,and the apparent pre-exponential factor was obtained.The kinetic model of curing reaction was described as dα/dt=3.196×108exp(-85797.5/RT)α0.033(1-α)1.0747.The results show that the model curve gives satisfactory agreement with experimental curve.With the heating rate increasing,the model curve gradually deviates from the experimental curve.This is due to the competition between functional group reactivity control and diffusion control in the curing reaction.

    参考文献
    相似文献
    引证文献
引用本文

田建军,张学军,田艳红,张莎.改性氰酸酯树脂体系的固化动力学[J].高分子材料科学与工程,2012,28(9):36-39. Jianjun Tian, Xuejun Zhang, Yanhong Tian, Sha Zhang. Curing Kinetics of Modified Cyanate Ester Resin System[J]. Polymer Materials Science & Engineering,2012,28(9):36-39.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司