PBT树脂对核壳粒子增韧聚碳酸酯结构与性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.41

基金项目:

国家自然科学基金资助项目(50803007);吉林省科技发展计划项目(20090142)


Effect of PBT Resin on the Structure and Properties of Core-Shell Particles Toughened PC
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    合成了甲基丙烯酸甲酯-丁二烯-苯乙烯-甲基丙烯酸环氧丙酯(MBS-g-GMA)核壳粒子用于聚碳酸酯(PC)的增韧,并在PC/MBS-g-GMA共混物中引入聚对苯二甲酸丁二醇酯(PBT)以提高性能。PBT的加入使MBS-g-GMA在PC中分散更均匀;共混物缺口冲击强度进一步提高,PBT质量分数为20%时,冲击强度接近700J/m;PBT提高了PC/MBS-g-GMA共混物的熔体流动速率,使加工性能得到改善。断裂形态表明,PBT加入后共混物应力发白区尺寸增加,剪切屈服更明显,共混物韧性提高。

    Abstract:

    Methyl methacrylate-butadiene-styrene-glycidyl methacrylate(MBS-g-GMA) core-shell particles were prepared to toughen polycarbonate(PC).The addition of poly(butylene terephthalate)(PBT) into the blends improves the dispersion of PC/MBS-g-GMA and MBS-g-GMA in PC matrix.The notched impact strength of the blends is improved,and when the mass fraction of PBT is 20%,impact strength of 700J/m can be achieved.The melt flow rate of PC/MBS-g-GMA blends increases with the introduction of PBT and the processability is improved.The fracture morphology shows the size of stress-whitening zone increases due to the addition of PBT and the shear yielding becomes much obvious and the toughness of the blends is improved.

    参考文献
    相似文献
    引证文献
引用本文

王星月,孙树林,邹德音,赵中谣,马俊杰. PBT树脂对核壳粒子增韧聚碳酸酯结构与性能的影响[J].高分子材料科学与工程,2012,28(9):40-43. Xingyue Wang, Shulin Sun, Deyin Zou, Zhongyao Zhao, Junjie Ma. Effect of PBT Resin on the Structure and Properties of Core-Shell Particles Toughened PC[J]. Polymer Materials Science & Engineering,2012,28(9):40-43.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司