苯并口恶嗪/聚醚砜共混体系的相结构与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ320.1

基金项目:

博士点基金资助项目(20090181110030);国家自然科学基金资助项目(50873062)


Morphology and Properties of Benzoxazine/Poly(Ether Sulfone) System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    首次用20%聚醚砜(PES)改性二苯甲烷二胺型苯并口恶嗪(BOZ-M)。通过涂膜的方法得到外观均匀的韧性薄膜,并借助于扫描电子显微镜(SEM)、傅里叶红外光谱(FT-IR)及动态机械分析仪(DMA)研究了固化物薄膜的微相结构、微相组成、耐热性能及力学性能。结果表明,共混体系在BOZ-M树脂固化过程中发生了明显相分离,形成以PES富集相为连续相、聚苯并口恶嗪(PBOZ-M)富集相为球形分散相的相反转结构的相形态,其中柔性的PES薄膜紧密包裹着PBOZ-M微球(1μm~3μm)。共混薄膜的玻璃化转变温度(Tg)为216℃,断裂伸长率为3.5%,具有优异的耐热性及力学性能。

    Abstract:

    4,4′-diaminodiphenyl methane based benzoxazine(BOZ-M) resin was modified with 20% content of poly(ether sulfone)(PES).Uniform and flexible film after curing could be obtained through casting method.The morphology of blending films,constitutes of each phase,thermal and mechanical property were studied by scanning electron microscope(SEM),Fourier transform infrared spectrometer(FT-IR) and dynamic mechanical thermal analysis(DMA).The results show that this blending film exhibits phase inversion structure,which includes PES-rich phase as the continuous phase and polybenzoxazine(PBOZ-M)-rich phase as the spherical disperse phase.PBOZ-M microspheres(1 μm~3 μm) were packed by flexible PES films.The glass transition temperature(Tg) for this blending film is 216 ℃,the strain at break is 3.5%.This blending film has outstanding thermal stability and improved mechanical property.

    参考文献
    相似文献
    引证文献
引用本文

梁晓敏,赵培,顾宜.苯并口恶嗪/聚醚砜共混体系的相结构与性能[J].高分子材料科学与工程,2012,28(9):109-111,123. Xiaomin Liang, Pei Zhao, Yi Gu. Morphology and Properties of Benzoxazine/Poly(Ether Sulfone) System[J]. Polymer Materials Science & Engineering,2012,28(9):109-111,123.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司