由交替共聚物引发苯乙烯原子转移自由基聚合合成梳型聚苯乙烯
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

常州市科技计划资助


Synthesis of Comb-Shaped Polystyrene via Atom Transfer Radical Polymerization Initiated by Alternating Copolymers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以苯乙烯与马来酰亚胺的交替共聚物引发原子转移自由基聚合合成梳型聚苯乙烯,研究了络合剂结构、催化剂浓度、引发剂官能度与活性、反应温度等对聚合可控性、反应速率、支化程度等的影响。分别用气相色谱跟踪单体转化率、三检测器凝胶渗透色谱跟踪聚合物分子量、特性黏数等的变化。结果表明,利用高活性引发剂将导致形成自由基浓度过高,从而通过双基偶合终止形成高分子量组分,但通过降低催化剂浓度对提高聚合可控性效果不明显,而采用低官能度或活性引发剂可提高可控性,但导致所得聚合物支化程度较低。采用高官能度引发剂在较低温度下反应则既维持可控性又获得高度支化聚合物。

    Abstract:

    The synthesis of comb-shaped polystyrene via atom transfer radical polymerization initiated by alternating copolymers of styrene and maleimide was explored, and the effect of ligand structure, concentration of catalyst, degree of functionality and activity of macroinitiator and temperature on the controlled behavior of the polymerization and the branched structure of the final polymer were investigated. The monomer conversion and molecular weight and intrinsic viscosity of the polymers were monitored by gas chromatography and triple detected gel permeation chromatography. The results show that the controllability cannot be improved by only reducing the concentration of catalyst, while using macroinitiators with a lower degree of functionality or low activity could enhance the controllability, but would give rise to sparsely branched polymer. However, polymerization at lower temperature using macroinitiators with a higher degree of functionality and high activity would lead to a controlled polymerization behavior and a highly branched architecture.

    参考文献
    相似文献
    引证文献
引用本文

吴 蓉,方 艳,翟光群.由交替共聚物引发苯乙烯原子转移自由基聚合合成梳型聚苯乙烯[J].高分子材料科学与工程,2013,29(1):13-18. Rong Wu, Yan Fang, Guangqun Zhai. Synthesis of Comb-Shaped Polystyrene via Atom Transfer Radical Polymerization Initiated by Alternating Copolymers[J]. Polymer Materials Science & Engineering,2013,29(1):13-18.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司