聚二联噻吩和聚三联噻吩的固相法合成与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21064007);新疆维吾尔自治区重点实验室开放课题(XJDX0908-2011-05)


Solid-State Synthesis and Properties of Polybithiophene and Polyterthiophene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以二噻吩(BT)和三联噻吩(TT)为单体,FeCl3 为氧化剂,在不同n(FeCl3)/n(单体)比例下,通过固相反应法合成出了聚(二噻吩)(poly(BT))和聚(三噻吩)(poly(TT))。并以傅立叶变换红外光谱、紫外可见吸收光谱、X射线衍射、热重分析和透射电镜等测试方法对聚合物进行了表征,研究了不同n(FeCl3)/n(单体)比例对聚合物结构与性能的影响。结果表明,n(FeCl3)/n(BT)为4∶1和n(FeCl3)/n(TT)为8∶1时,所得聚合物相对于其它比例下的聚合物表现出了较高的分子量、共轭程度和热稳定。其中,poly(TT)的分子量、共轭程度、热稳定、结晶性等特性随单体与FeCl3 比例发生明显变化,但在微观形貌上无明显变化,而poly(BT)则随单体与FeCl3 比例变化结果与poly(TT)相反,只是在微观形貌上产生了一定的差异。

    Abstract:

    Poly(bihiophene)(poly(BT)) and poly(terthiophene) (poly(TT)) were synthesized by solid state oxidative polymerization of bihiophene and terthiophene in various ratios of oxidant(FeCl3) to the monomers. The polymers were characterized by Fourier transform infrared spectroscopy(FT-IR), ultraviolet visible spectroscopy(UV-vis), X-ray diffraction(XRD), thermalgravimetric analysis(TGA) and transmission electron microscope(TEM). The effects of FeCl3 on the structure and properties of solid state synthesized poly(bihiophene) and poly(terthiophene) were studied. The results show that poly(bihiophene) and poly(terthiophene) prepared with the ratio of n(FeCl3)/n(BT)=4∶1 or n(FeCl3)/n(TT)=8∶1, display higher molecular weight, conjugation length and thermal stability than other polymers prepared from other ratios of FeCl3 to the monomer. Furthermore, poly(terthiophene) displays a higher crystallinity than poly(bihiophene). The molecular weight, conjugation length, thermal stability and crystallinity of poly(terthiophene) were strongly affected by the molar ratios of FeCl3/TT, except the morphology. In the case of poly(bihiophene), no differences was observed in the molecular weight, conjugation length, thermal stability and crystallinity with varying the ratio of n(FeCl3)/n(BT), except the morphology.

    参考文献
    相似文献
    引证文献
引用本文

吐尔逊·阿不都热依木, 如仙古丽·加玛力, 吐尼沙古丽·阿吾提, 司马义·努尔拉, 邵伟伟.聚二联噻吩和聚三联噻吩的固相法合成与性能[J].高分子材料科学与工程,2013,29(1):31-35. Abdiryim Tursun, Jamal Ruxangul, Awut Tunsagul, Nurulla Ismayil, Weiwei Shao. Solid-State Synthesis and Properties of Polybithiophene and Polyterthiophene[J]. Polymer Materials Science & Engineering,2013,29(1):31-35.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司