基于原子转移自由基聚合法制备PS-acyl-P(AM-co-GMA)树脂
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家高技术研究发展专项经费资助(2007AA02Z200,2011AA02A203)


Preparation of PS-Acyl-P(AM-co-GMA) via Atom Transfer Radical Polymerization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用原子转移自由基聚合法(ATRP),以氯乙酰化聚苯乙烯微球(PS-acyl-Cl)为大分子引发剂,甲基丙烯酸缩水甘油酯(GMA)和丙烯酰胺(AM)为单体,CuCl及N,N,N′,N′-四甲基乙二胺(TMEDA)为催化体系制备得到梳状亲水性环氧树脂(PS-acyl-P(AM-co-GMA))。考察了溶剂体系、反应时间和反应温度等反应条件对接枝反应的影响,在n(PSacyl-Cl)∶n(CuCl)∶n(TMEDA)∶n(AM)∶n(GMA)=1∶1∶1∶1.8∶22.2,V (GMA)∶V (N,N′-二甲基甲酰胺)∶V(甲苯)=1∶0.6∶0.4时,于80℃反应60min获得700%左右高增重率的PS-acyl-P(AM-co-GMA),并可通过改变单体AM 添加量获得不同亲水性的环氧树脂。

    Abstract:

    A comblike and hydrophilic resin with epoxy groups (PS-acyl-P(AM-co-GMA ))was synthesized by atom transfer radical polymerization (ATRP) method, using the chloroacetyl styrene divinylbenzene copolymer microspheres (PS-acyl-Cl) as the initiator, hydrophilic acrylamide (AM) and glycidyl methacrylate (GMA) as monomer, CuCl and N,N,N′, N′-tetramethyl ethylenediamine(TMEDA) complex as catalyst. The influences of solvent, reaction time and reaction temperature on the grafting reaction were investigated. The optimal conditions were as followed: n(PS-acyl-Cl)∶n(CuCl)∶n(TMEDA)∶n(AM)∶n(GMA) = 1∶1∶1∶1.8∶22.2,V(GMA)∶V(DMF)∶V(toluene) = 1∶0.6∶0.4, reaction temperature was 80 ℃,reaction time was 60min. Satisfactory grafting yields(up to 700% )were obtained under the optimized conditions and the hydrophily of the microspheres could be controlled via changing the amount of AM.

    参考文献
    相似文献
    引证文献
引用本文

陈新营,魏荣卿,刘晓宁,潘 翠,周翠微,姜 岷.基于原子转移自由基聚合法制备PS-acyl-P(AM-co-GMA)树脂[J].高分子材料科学与工程,2013,29(1):36-39. Xinying Chen, Rongqing Wei, Xiaoning Liu, Cui Pan, Cuiwei Zhou, Min Jiang. Preparation of PS-Acyl-P(AM-co-GMA) via Atom Transfer Radical Polymerization[J]. Polymer Materials Science & Engineering,2013,29(1):36-39.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司