原位增容界面强度对PA6/PMMA 共混物性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of In Situ Compatibility Interface Strength on the Properties of PA6/PMMA Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过扫描电镜、差示扫描量热仪和力学性能测试等分析方法,研究甲基丙烯酸甲酯(MMA)和甲基丙烯酸缩水甘油酯(GMA)共聚物对尼龙6PA6)/PMMA共混物形态结构、结晶行为和力学性能的影响。结果表明,P(MMA-co-GMA)可以提高PA6与PMMA的相容性,改善共混物的拉伸性能,但其增容效果取决于P(MMA-co-GMA)中的环氧基团与PA6末端氨基所形成的接枝共聚物的数量,只有当其达到某一临界值时,共混物才具有最佳的力学性能,并且加入P(MMA-co-GMA)后,基体相PA6的结晶能力降低,导致共混物在拉伸过程中出现二次屈服行为。

    Abstract:

    The effects of poly(methyl methacrylate co glycidyl methacrylate)(MMA-co-GMA) copolymer on morphology, crystallizing behavior and tensile properties of PA6/PMMA blends were investigated by SEM,DSC and mechanical testing. The results show that the epoxide groups of MMA co GMA reacted with the NH2 ends of PA6 to form in situ PA6-g-PMMA copolymers, the compatibility between PA6 and PMMA is improved and the tensile property of PA6/PMMA blends is enhanced significantly. But the effect of poly(MMA-co-GMA)copolymer on PA6/PMMA blends depends on the amount of the graft copolymers. The addition of poly(methyl methacrylate-co-glyceryl methacrylate)copolymer can effectively reduce the crystallization ability of PA6, which causes a double yielding behavior of PA6 and its blends.

    参考文献
    相似文献
    引证文献
引用本文

杨思佳,曹春雷,宋海贺,曲 淼,王文同,张会轩.原位增容界面强度对PA6/PMMA 共混物性能的影响[J].高分子材料科学与工程,2013,29(1):63-66. Sijia Yang, Chunlei Cao, Haihe Song, Miao Qu, Wentong Wang, Huixuan Zhang. Effect of In Situ Compatibility Interface Strength on the Properties of PA6/PMMA Blends[J]. Polymer Materials Science & Engineering,2013,29(1):63-66.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司