α-氨基酮光引发剂促进环氧/丙烯酸酯混杂树脂光-热的双固化
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of α-Aminoketone Photoinitiator on UV Heat Dual Curing of Epoxy/Acrylic Hybrid Resins
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将光引发剂2-二甲氨基-2-苄基-1-(4-吗啉苯基)-1-丁酮(PI-369)加入环氧树脂和环氧/丙烯酸酯混杂树脂,以紫外辐射和热激化树脂固化,以差示扫描量热(DSC)分析样品的起始放热温度,以红外光谱(FT-IR)分析环氧基团的变化,测量光、热固化样品的凝胶含量,比较PI-369光解前后对环氧树脂热固化的影响。引发剂PI-369经光照后可促进环氧与酸酐的反应,大幅降低环氧树脂固化的起始放热温度,显著促进光交联混杂树脂体系中环氧组分的热固化反应。混杂树脂经紫外辐射和80℃热固化12h,凝胶含量可达95%以上。

    Abstract:

    Photoinitiator 2-benzyl-2-(dimethylamino)-1-[4-(4-morpholinyl) phenyl]-1-butanone (PI-369) was dissolved in epoxy resin and epoxy/acrylic hybrid resin, and the liquid resins were cured by UV radiation and heating. The contents of epoxy groups were identified by FT-IR and the incipient exothermal temperature of curing was measured by DSC. The effect of the photoinitiator before and after UV irradiation on the gel contents was investigated. After UV irradiation, PI-369 could promote the reaction of epoxy groups with methyl hexahydrophthalic anhydride (MHHPA) and the incipient exothermal temperature dropped greatly. For the UV cured hybrid resins, the activation temperature of the epoxy component for thermally curing was measured. The gel content of the hybrid resin was above 95% after UV irradiation and heating at 80 ℃ for 12h.

    参考文献
    相似文献
    引证文献
引用本文

李建雄,柯 涛,马银涛,刘安华.α-氨基酮光引发剂促进环氧/丙烯酸酯混杂树脂光-热的双固化[J].高分子材料科学与工程,2013,29(1):84-87. Jianxiong Li, Tao Ke, Yingtao Ma, Anhua Liu. Effect of α-Aminoketone Photoinitiator on UV Heat Dual Curing of Epoxy/Acrylic Hybrid Resins[J]. Polymer Materials Science & Engineering,2013,29(1):84-87.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司