玻璃态PC应变老化特性与物理老化特性的比较
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家留学回国人员科研启动基金(教外司留2003406)


Comparison of Strain Induced Aging With Physical Aging in Glassy Polycarbonate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过力学性能和差示扫描量热(DSC)测试对玻璃态聚碳酸酯(PC)物理老化和应变老化进行了研究。实验结果表明,应变老化试样的бу 随t的延长而增大,并且ε越大,бу 随时间的变化越大。在相同的老化时间内,不仅是淬火应变老化试样,而且退火应变老化试样的бу 值亦高于物理老化试样,说明材料由韧性转变为脆性。而DSC测试表明,淬火应变老化试样在Tg 附近出现的吸热峰值大于物理老化试样的吸热峰值,这一结果与在准平衡状态下,即退火应变老化试样时所得到的结果相似,说明应变老化试样形成了与物理老化相似的凝聚缠结之外,还有部分能量储存在分子链内部的特异结构。

    Abstract:

    Glassy polycarbonate (PC) samples of physical aging and samples strain aging were studied by mechanical property test and differential scanning calorimetry (DSC) measurement. Mechanical property test results show that, the yield stress бу of strain aging samples gets larger as time goes on, and in the same aging time, the yield stress бу of samples quenched and aged as well as annealed and aged under tensile strains is higher than that of samples physically aged. This means that the polycarbonate material property was changed from toughness to brittleness. The DSC measurement results shows that, around the glass transition temperature Tg, the heat absorption peaks of samples quenched and aged under tensile strains are larger than that of physical aging samples. The similar results were obtained for the samples in the quasi-equilibrium state, namely the samples annealed and aged under tensile strains.

    参考文献
    相似文献
    引证文献
引用本文

崔善子,任 超,王俊潮.玻璃态PC应变老化特性与物理老化特性的比较[J].高分子材料科学与工程,2013,29(1):96-99. Shanzi Cui, Chao Ren, Junchao Wang. Comparison of Strain Induced Aging With Physical Aging in Glassy Polycarbonate[J]. Polymer Materials Science & Engineering,2013,29(1):96-99.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司