树脂传递模塑成型的光纤光栅监测
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

辽宁省高等学校优秀人才支持计划(LJQ2011018);沈阳科学计划项目(F11-237-1-00);国家自然科学基金资助项目(51073094)


Monitoring of the Resin Transfer Molding Process Using Fiber Bragg Gratings Sensors
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    复合材料固化过程对于生产高质量复合材料部件十分必要。文中利用光栅传感器监测树脂传递模塑(RTM)复合材料层板制造过程中内应变及温度,根据复合材料内应变/温度关系曲线的突变点,获得复合材料的材料转变点(凝胶点、玻璃化转变温度)信息。在复合材料降温阶段,利用光栅监测的应变/温度值计算RTM 成型复合材料的内层和外层热膨胀系数。监测结果与传统检测方法相比十分一致。

    Abstract:

    Fiber Bragg grating (FBG)sensors were used to measure the development of internal strain and temperature in composite aminate manufactured by resin transfer molding (RTM). The sensors are also used to capture the material transitions (gel point, glass transition temperature) of the composite from the abrupt point of the internal strain and temperature relationship curve. Coefficients of thermal expansion (CTE) of internal composite layers and outer composite layers were calculated from the strain and temperature values of FBGS during the composites cooling process. The monitoring results are very consistent with that detected by the traditional method.

    参考文献
    相似文献
    引证文献
引用本文

卢少微,高 禹,张海军,冷劲松.树脂传递模塑成型的光纤光栅监测[J].高分子材料科学与工程,2013,29(1):119-122. Shaowei Lu, Yu Gao, Haijun Zhang, Jinsong Leng. Monitoring of the Resin Transfer Molding Process Using Fiber Bragg Gratings Sensors[J]. Polymer Materials Science & Engineering,2013,29(1):119-122.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司