碳纳米管/环氧树脂复合材料的静电自组装制备及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家863计划(2009AA03Z337)


Electrostatic Self-Assembly Preparation and Properties of Carbon Nanotube/Epoxy Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用静电自组装法制备了均匀分散的碳纳米管环氧树脂复合材料,并对比分析了普通碳纳米管和功能化碳纳米管对环氧树脂热学和电学性能的影响。采用透射电镜(TEM)观察到碳管和树脂乳液自组装形成“葡萄藤”状结构,扫描电镜(SEM)观察发现,碳管可在环氧树脂中均匀分散并形成网络。电、热性能研究发现,添加3%普通碳纳米管可降低环氧树脂表面电阻率7个数量级,导热系数较纯树脂提高112%,而羧基化碳纳米管表面电阻率仅降低4个数量级,导热系数仅提高86%。

    Abstract:

    Carbon nanotubes/epoxy(EP) composite was prepared by electrostatic self assembly method successfully, and the effects of multi walled carbon nanotubes (MWCNTs) and MWCNTs-COOH on thermal and electrical performance of epoxy were also studied. Carbon nanotubes were dispersed well in epoxy resin matrix. Vine like structure was observed by TEM. And the formation of network structure was also observed by SEM. Compared with the neat epoxy, when the content of CNTs is 3%, the surface resistivity of MWCNTs/EP composites decreases 7 orders of magnitude, the thermal conductivity is improved by 112%, while the surface resistivity of MWCNTs-COOH/EP composites decrease only 4 orders of magnitude and its thermal conductivity is improved 86%.

    参考文献
    相似文献
    引证文献
引用本文

熊高虎,刘佳鸿,孙 静.碳纳米管/环氧树脂复合材料的静电自组装制备及性能[J].高分子材料科学与工程,2013,29(1):136-139. Gaohu Xiong, Jiahong Liu, Jing Sun. Electrostatic Self-Assembly Preparation and Properties of Carbon Nanotube/Epoxy Composites[J]. Polymer Materials Science & Engineering,2013,29(1):136-139.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司