聚氨酯/有机蒙脱土纳米硬质泡沫的制备及表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(20976145,21076170)


Preparation and Characterization of Polyurethane/Organo-Montmorillonite Nanocomposites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以OMMT为原料制备了聚醚-有机蒙脱土(POP-OMMT)纳米硬质泡沫。X射线衍射(XRD)测试表明聚醚多元醇(POP)插层进入OMMT 层间,其层间距由2.1nm 扩大到3.9nm。用不同比例POP-OMMT 与POP、多异氰酸酯(PM200)及其它助剂反应,制备了聚氨酯/有机蒙脱土纳米硬质泡沫(PU/OMMT)。当聚氨酯(PU)中POP-OMMT 添加量为2.20%和3.50%时,PU/OMMT的压缩强度分别比PU 基体材料提高16.87kPa和22.50kPa,弯曲强度提高20.81kPa和35.35kPa,断裂伸长率提高21.05%和28.15%,初始失重温度也提高了10.86 ℃和3.62 ℃。引入适量OMMT可提高聚氨酯硬质泡沫的力学性能和热稳定性。

    Abstract:

    Polyether-polyol modified montmorilonites (POP-OMMT) were prepared using organo-montmorilonites (OMMT) as raw material. XRD analysis suggests that the oligomer polyether polyols intercalated into the inter layers of the organo montmoriased by 22.50 kPa, 35.35 kPa and 28.15% respectively,the initial decomposition temperature increased by 3.62 ℃. The tests show that mechanical properties and thermal stability of the nanocomposites are better than those of pure PU. lonites, and enlarged the basal spacing of the modified clays from 2.1 nm to 3.9 nm. Rigid polyurethane foam nanocomposites were synthesized by the reaction of POP-OMMT with polymethylidyne polyphenyl polyisocyanate, polyether polyols, chain extender, crosslinking agent and accessory ingredients. When 3.50%POP-MMT was added to PU, the compressions strength, bend strength and extension increased by 22.50kPa,35.35kPa and 28.15% respectively,the initialde composition temperature increased by 3.62℃.The tests show that mechanical properties and thermal stability of the nanocomposites are better than those of pure PU.

    参考文献
    相似文献
    引证文献
引用本文

叶美玲,洪金庆,陈翠雪,朱爱梅,刘庆林.聚氨酯/有机蒙脱土纳米硬质泡沫的制备及表征[J].高分子材料科学与工程,2013,29(1):140-143. Meiling Ye, Jinqing Hong, Cuixue Chen, Aimei Zhu, Qinglin Liu. Preparation and Characterization of Polyurethane/Organo-Montmorillonite Nanocomposites[J]. Polymer Materials Science & Engineering,2013,29(1):140-143.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司