壳聚糖/聚乳酸复合纳米纤维的制备与表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31171788)


Preparation and Characterization of Chitosan/Poly(Lactic Acid) Composite Nanofibers via Electrospinning Technique
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以甲酸溶解壳聚糖(CS)、三氯甲烷/乙醇混合溶剂溶解聚乳酸(PLA),两溶液混合后得均质纺丝液,通过静电纺丝制备出CS/PLA复合纳米纤维。采用扫描电镜(SEM)、傅立叶变换红外光谱(FT-IR)对纤维的形态与结构进行分析表征。结果表明,质量分数1.6%的CS甲酸溶液与质量分数15% 的PLA三氯甲烷/乙醇混合溶液(三氯甲烷∶乙醇= 1∶1,体积比)等体积混合,电压15kV,极距15cm 下,可得到均匀的直径为(290±28)nm 的CS/PLA 复合纳米纤维,且CS和PLA分子间以氢键结合。

    Abstract:

    An uniform electrospun solution of chitosan (CS) and poly (lactid acid) (PLA) mixture was obtained by blending CS formic acid solution and PLA chloroform/ethanol solution, and then CS/PLA composite nanofibers were prepared from the as prepared electrospun solution by eletrospinning technique. The morphology and structure of the nanofibers were investigated by scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR). The results show that CS/PLA composite nanofibers with diameter of 290±28 nm could be fabricated under the optimized conditions as following: volume ratio of CS formic acid solution (mass fraction of CS is 1.6%) to PLA chloroform/ethanol solution (mass fraction of PLA is 15%, volume ratio of chloroform to ethanol is 1∶1) is 1:1, voltage is 15 kV, and tip to collector distance (TCD) is 15 cm. Moreover, hydrogen bonds exist between CS and PLA molecular in CS/PLA fibers matrix.

    参考文献
    相似文献
    引证文献
引用本文

王华林,丁 曼,翟林峰,宋秋生,姜绍通.壳聚糖/聚乳酸复合纳米纤维的制备与表征[J].高分子材料科学与工程,2013,29(1):162-165. Hualin Wang, Man Ding, Linfeng Zhai, Qiusheng Song, Shaotong Jiang. Preparation and Characterization of Chitosan/Poly(Lactic Acid) Composite Nanofibers via Electrospinning Technique[J]. Polymer Materials Science & Engineering,2013,29(1):162-165.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司