双酚A 型聚芳酯/半芳香族聚酰胺共聚物的合成与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

四川大学高分子材料工程国家重点实验室开放课题(KF201304);航空科学基金(2011ZF56026);国家自然科学基金资助项目(51003044);江西省教育厅科学技术研究项目(GJJ12193)


Synthesis and Properties of Bisphenol-A Polyarylester/Semi-Aromatic Polyamide Random Copolymers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以双酚A(BPA)、1,6-己二胺(HMDA)、对苯二甲酰氯(TPC)、间苯二甲酰氯(IPC)为单体,采用相转移界面缩聚法,通过改变单体的物质的量配比,合成了系列双酚A型聚芳酯-半芳香族聚酰胺(PAR/PA)共聚物,并对聚合物的结构与性能进行了表征。结果表明,随着主链中聚对苯二甲酰-1,6-己二胺(PA6T)结构单元的增加,聚合物的玻璃化温度(Tg)呈现鞍马形变化,熔融温度(Tm)降低,而热分解温度(Td)变化不大。半芳香族尼龙结构单元的引入,使聚合物呈结晶聚集态。

    Abstract:

    A series of bisphenol-A polyarlester (PAR) and semi-aromatic polyamide random copolymers(PAR-A-co-PA6T/PA6I) were ynthesized by interfacial polycodensation of bisphenol-A(BPA), 1,6-hexamethylenediamine, terephthaloyl chloride(TPC) and isophthaloyl chloride(IPC),which was catalyzed by the phase transfer catalyst. The unit ratio of PAR-A, PA6T and PA6I in the main chain of product can be modified by changing the molar ratio of monomers. The copolymers were characterized by FT-IR, 1H-NMR, WAXD, GA and DSC. The results show that the glass transition temperature(Tg) of the copolymers is in the range of 161 ℃~183 ℃, the decomposition temperature (Td) at 5% mass loss is from 325 ℃ to 349 ℃ and the melting temperature(Tm) is between 240 ℃ and 290 ℃. Tg of the PAR/PA6I/PA6T copolymers arrives at top and then descents with increasing the mole ratio of TPC in the monomer. The introduction of semi aromatic polyamide units makes the co-polymer show crystal state.

    参考文献
    相似文献
    引证文献
引用本文

周丽云,王 乐,宋 琤,宋才生.双酚A 型聚芳酯/半芳香族聚酰胺共聚物的合成与性能[J].高分子材料科学与工程,2013,29(2):26-30. Liyun Zhou, Le Wang, Cheng Song, Caisheng Song. Synthesis and Properties of Bisphenol-A Polyarylester/Semi-Aromatic Polyamide Random Copolymers[J]. Polymer Materials Science & Engineering,2013,29(2):26-30.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司