聚酯型聚氨酯阻尼材料的结构性能与表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河北省科技厅科技计划项目(11215118D);河北省科学院重大攻关项目(10708)


Characterization and Properties of Polyester Type Polyurethane Damping Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以羟基特戊酸新戊二醇单酯(HPHP)与丁二酸(SA)缩聚反应合成聚酯二醇,再与2,4-甲苯二异氰酸酯(TDI-100)和3,3’-二氯-4,4’-二氨基二苯甲烷(MOCA)反应制备聚氨酯(PU)阻尼材料,研究了聚酯二醇分子量对PU 阻尼性能及力学性能的影响,并用红外光谱(FT-IR)、核磁共振(1H-NMR)以及扫描探针显微镜(SPM)对其结构进行了表征。结果表明,随聚酯二醇分子量增加,PU 阻尼材料的损耗因子最大值(tanδmax)显著提高,Tg 先降低后升高;PU 阻尼材料的硬度、拉伸强度和撕裂(直角)强度明显下降,而扯断伸长率显著提高。

    Abstract:

    Polyester type polyurethane (PU) were prepared by the reaction of 2,4-tolulene diisocyanate (TDI-100), 3,3′-dichloro 4,4′-diaminodiphenyl methane (MOCA) with polyester glycol, which was synthesized using hydroxypivalyl hydroxypivalate (HPHP) and succinic acid (SA). The damping and mechanical properties of PUs with different molecular weights polyester glycols were studied. The structures of damping PU were characterized by FT-IR, 1H-NMR and scanning probe microscope(SPM). The xperimental results indicate that the maximum loss factor (tanδmax) of PU is improved significantly with increasing of the molecular weight of polyester glycols, while glass transition temperature (Tg) increases at first and then decreases. Meanwhile, Shore A hardness, tensile strength and tear strength of PU decrease obviously and the elongation at break greatly increases.

    参考文献
    相似文献
    引证文献
引用本文

张晓蕾,周海军,李彦涛,刘德居,瞿雄伟.聚酯型聚氨酯阻尼材料的结构性能与表征[J].高分子材料科学与工程,2013,29(2):62-65. Xiaolei Zhang, Haijun Zhou, Yantao Li, Deju Liu, Xiongwei Qu. Characterization and Properties of Polyester Type Polyurethane Damping Materials[J]. Polymer Materials Science & Engineering,2013,29(2):62-65.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司