pH 值与温度对中空聚合物微球的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

西南科技大学研究生创新基金(11ycjj07);四川省非金属复合与功能材料重点实验室开放课题(10zxfk33)


Influence of pH Value and Temperature on Hollow Polymer Particles
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在高压釜中,以单分散的聚苯乙烯-甲基丙烯酸(P(St-MAA))为种子微球,采用碱中和冷却法制备中空聚合物微球,研究了pH 值与温度对中空微球的影响。扫描电子显微镜、透射电子显微镜等测试分析表明,pH 值与温度对中空微球的体积变化分数ΔV、中空孔径DHTEM 、中空度A 影响明显;随着pH 值的增大或反应温度的升高,ΔV 增大。当反应温度一定时(t=140℃),pH=10.5的乳液制备的中空微球DHTEM 约为184nm,A 为17.3%;当乳液的pH 一定(pH=12.5),碱中和反应温度以125℃为宜,此时DHTEM 约为210nm,A 为24.6%。

    Abstract:

    Hollow polymer microspheres were prepared by alkali neutralization and cooling method in hydrothermal synthesis reactor using monodisperse styrene-methylacrylic acid copolymer particles. The effects of pH value and temperature on hollow structure were investigated. As clearly revealed by the scanning electron microscopy(SEM) and transmission electron microscope(TEM) nalyses, the pH value and temperature have great effect on volume change scores(ΔV), hollow aperture(DHTEM) and hollowness(A) of hollow polymer particles. The ΔV increases with the increase of the pH value or temperature. When the reaction temperature is 140 ℃ and pH value is 10.5, DHTEM and A of hollow polymer microspheres are 187nm and 17.3% respectively. When the pH value is 12.5 and the reaction temperature is 125 ℃, DHTEM and A of hollow polymer microspheres are 210nm and 24.6% respectively.

    参考文献
    相似文献
    引证文献
引用本文

聂冬梅,段 涛,薛 璐,韩尚君,罗江山,唐永建. pH 值与温度对中空聚合物微球的影响[J].高分子材料科学与工程,2013,29(2):70-73. ongmei Nie, Tao Duan, Lu Xue, Shangjun Han, Jiangshan Luo, Yongjian Tang. Influence of pH Value and Temperature on Hollow Polymer Particles[J]. Polymer Materials Science & Engineering,2013,29(2):70-73.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司